The error code '0x610000f6' message displays on the control panel, and the product does not print.
note:This video shows the HP Photosmart Plus All-in-One Printer series (B209), but the steps are the same for your printer.
caution:Do not remove jammed paper at this stage. Trying to clear jammed paper from the front of the product can damage theprint mechanism.
caution:If the paper tears while removing it from the rollers, check the rollers and wheels for torn pieces of paper that might remain inside the product. If any torn pieces of paper remain inside the product, more paper jams are likely to occur.
warning:Do not reach into the device when it is on and the carriage is stuck as this could cause an electrical shock. Always turn the product off before you remove any paper jam.
caution:Do not reconnect the power cord and USB cable until instructed to do so.
note:If the latch handle is up, it results in incorrectly seated cartridges and the product does not function correctly.
warning:You must disconnect the power cord to move parts by hand without the risk of an electrical shock.
note:Wait until the carriage is idle and silent before proceeding.
note:If the product prints when plugged directly into a wall outlet, the power strip or surge protector might not be allowing enough voltage to reach the product.