Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Need Windows 11 help?
Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center

Feedback

hp-concentra-wrapper-portlet

Actions

HP Deskjet F4100 All-in-One Series - Install the Print Cartridges

Introduction

Follow the instructions below to install the print cartridges.

Installing the print cartridges

Verify that the HP All-in-One is on. Press the On button to turn on the HP All-in-One. The On button is lit when the HP All-in-One is on.
Open the print cartridge door. The print carriage moves to the center of the HP All-in-One. Verify that there is plain paper loaded in the input tray.

Figure : Opening the print cartridge door
Remove the new print cartridge from its packaging and, being careful to touch only the black plastic, gently remove the plastic tape by using the pink pull tab.
Figure : Removing the tape

Copper-colored contacts

Plastic tape with pink pull tab (must be removed before installing)

Ink nozzles under tape
caution:
Do not touch the copper-colored contacts or ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.
Insert the new print cartridge forward into the empty slot. Then gently push on the upper part of the print cartridge forward until it clicks into the socket.
- Insert the tri-color print cartridge into the left slot.
- Insert the black or photo print cartridge into the right slot.
Figure : Print cartridge locations

Print cartridge slot for the tri-color print cartridge

Print cartridge slot for the black and photo print cartridges
Close the print cartridge access door.

Figure : Closing the print cartridge door
If a new print cartridge is installed, the print cartridge alignment process starts after about 20 seconds.
The HP All-in-One aligns the print cartridges. Recycle or discard the print cartridge alignment sheet.