hp-support-head-portlet

Ações
Carregando...
Suporte ao Cliente HP - Base de Conhecimento

hp-contact-secondary-navigation-portlet

Ações
Carregando...

hp-share-print-widget-portlet

Ações
Carregando...
  • Informações

    Conserte e solucione problemas de atualização do Windows 10 em um Computador ou Impressora HP. Clique aqui

    Informações

    Problemas de áudio ou som? Teste o nosso automatizado HP Audio check!

    Informações
    Crie uma conta HP hoje!

    Conecte-se com o suporte da HP com mais rapidez, gerencie todos os seus dispositivos em um só lugar, veja as informações de garantia e mais. Saiba mais

hp-concentra-wrapper-portlet

Ações
Carregando...

HP R3xxx, ZV5xxx Notebook PCs - Replacing the Hard Disk Drive

This document provides instructions for the removal and replacement of the hard drive for the R3000, R3100, R3200, R3300, ZV5000 and ZV5200 series notebook PCs.
Use the video as a guide while following the written instructions below.
To view the video press the Play button on the player control bar below the video.
To stop the video press the Pause button on the player control bar below the video.
To restart the video press the Rewind button on the player control bar below the video.
observação:
Flash Player from Macromedia is required to view this video. Visit the Macromedia website (in English) to download and install Flash Player.

Step 1 - Remove the battery

  1. Slide and hold the battery release latch to the unlock position.
  2. Use your finger to lift the battery up and out.

Step 2 - Remove the hard disk drive

  1. Remove the two Phillips-head screws that secure the hard disk drive to the base enclosure.
  2. Lift the inside edge of the hard disk drive to unseat the hard disk drive connector from the system board.
  3. Remove the four Phillips-head screws that secure the hard disk drive to the hard disk drive bracket.
  4. Remove the hard disk drive from the hard disk drive bracket.
  5. Pull the hard disk drive out of the bay.
  6. Place the hard disk drive in a static dissipative bag.

Step 3 - Replace the hard disk drive

  1. Remove the hard disk drive from the static free bag.
  2. Place the hard disk drive into the hard disk drive bracket.
  3. Replace the four Phillips-head screws that secure the hard disk drive to the hard disk drive bracket.
  4. Insert the outside edge of the hard disk drive into the drive bay.
  5. Press down on the hard disk drive to seat the hard disk drive connector to the system board.
  6. Replace the two Phillips-head screws.

Step 4 - Replace the battery

  1. Insert the battery into the notebook.
  2. Press the battery into the base enclosure until you hear a click.

hp-feedback-input-portlet

Ações
Carregando...

hp-feedback-banner-portlet

Ações
Carregando...

hp-country-locator-portlet

Ações
Carregando...
País/região: Flag Brasil

hp-detect-load-my-device-portlet

Ações
Carregando...