hp-support-head-portlet

Ações
Carregando...
Suporte ao Cliente HP - Base de Conhecimento

hp-contact-secondary-navigation-portlet

Ações
Carregando...

hp-share-print-widget-portlet

Ações
Carregando...
  • Informações

    Conserte e solucione problemas de atualização do Windows 10 em um Computador ou Impressora HP. Clique aqui

    Informações

    Problemas de áudio ou som? Teste o nosso automatizado HP Audio check!

    Informações
    Crie uma conta HP hoje!

    Conecte-se com o suporte da HP com mais rapidez, gerencie todos os seus dispositivos em um só lugar, veja as informações de garantia e mais. Saiba mais

hp-concentra-wrapper-portlet

Ações
Carregando...

HP Photosmart 8150 Series Printers - Removing and Installing Print Cartridges

Cartridge replacement animation

Click the play button above () to see an animation on how to replace print cartridges, or continue to the sections below for detailed instructions.

Step one: Open the printer

  1. Make sure the printer is turned on. Press the Power button if it is not lit.
  2. Open the printer cover, then wait until the print cartridge cradle is idle and silent.

Step 2 - Remove old cartridges

  1. Press down lightly on top of the cartridge latch.
  2. Pull out the bottom of the latch to unhook it.
  3. Slide the cartridge out.
    Figura : Open the cartridge latch
    Figura : Slide the cartridge out

Step 3 - Use a cartridge protector

If you are temporarily removing a working cartridge (for instance, removing a Black cartridge in order to install a Photo cartridge), put it in a cartridge protector. Cartridge protectors come with Photo cartridges.
Figura : Insert a cartridge into a cartridge protector
Figura : To remove, press down on the latch

Step 4 - Make sure the new cartridges are compatible

Purchase replacement cartridges and other supplies from the HP Store or local retailers.

Step 5 - Install the new cartridges

  1. If you are installing a new print cartridge, remove the protective tape.
      cuidado:
    Do not attempt to remove the copper strip.
    Figura : Remove the protective tape
      cuidado:
    After the tape is removed, do not touch the copper contacts or the ink nozzles.
      Figura : Contacts and nozzles
    1. Contacts
    2. Nozzles
  2. Hold the print cartridge so the nozzles are down and the contacts face toward the printer, then slide the cartridge into the carriage.
    • Cartridges marked with a triangle go into the left carriage slot.
    • Cartridges marked with a square or pentagon go into the right carriage slot.
    Figura : Put each cartridge into the proper slot
  3. Push down on the print cartridge latch until it snaps closed.
    Figura : Slide the print cartridge in
    Figura : Close the latch
  4. Close the printer cover.

hp-feedback-input-portlet

Ações
Carregando...

hp-feedback-banner-portlet

Ações
Carregando...

hp-country-locator-portlet

Ações
Carregando...
País/região: Flag Brasil

hp-detect-load-my-device-portlet

Ações
Carregando...