HP ENVY Inspire 7200e, 7900e Printers - Replacement printer instructions (Europe, Middle East, Africa)

Remove the ink cartridges before returning the printer to HP.

1. Turn on the printer.

2. Open the front door.

   

3. Lift the cartridge access door.

   

4. Wait until the carriage is idle and silent before you continue.

5. Lightly press down on the ink cartridge to release it, and then pull the ink cartridge out of its slot.

   

6. Repeat the previous step to remove the other ink cartridge.

7. Recycle the cartridges.

   Note:

   Do not use the old cartridges in your replacement printer. The replacement printer ships with new Setup ink cartridges.

8. Close the cartridge access door.

   

9. Close the front door.

   

10. Turn off the printer.

11. Disconnect the power cord and any other cable connected to the printer.

Set aside the following parts to be used with your replacement printer. Do not send these parts to HP.

• Power cord

  

• USB cable

  

• Printer manuals

  

Make sure your replacement printer works properly before returning your previous printer to HP.

1. Unpack the replacement printer from the box, remove packaging materials including cardboard from the ink area, connect the power cable, turn on the printer, and then select your language and country from the front panel.

2. Go to 123.hp.com to install the recommended printer software or app to complete the setup and connect to your computer or mobile device.

3. Follow the step-by-step instructions in the software, which includes a guided animation to install the Setup ink cartridges that came with the printer, load paper, and complete the setup.

4. Test all printer functions to make sure the printer is working properly.

5. Return your original printer to HP using the instructions that came with the replacement printer.