hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Audio or sound issues? Try our automated HP Audio check!

    Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

    Information
    Create an HP account today!

     Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more​

hp-concentra-wrapper-portlet

Actions
Loading...

HP LaserJet MFP M72625 and MFP M72630 - Removal and replacement: Toner cartridge

Learn how to remove and replace the toner cartridge.

Introduction

Before performing service

Turn the printer power off

  • Disconnect the power cable.

Warning:

To avoid damage to the printer, turn the printer off, wait 30 seconds, and then remove the power cable before attempting to service the printer.

Use the table below to identify the correct part number for your printer. To order the part, go to www.hp.com/buy/parts.

Part information

Part number

Part description

JC02-00140A

Toner - Black

Required tools

  • No special tools are needed to remove or install this assembly.

After performing service

Turn the printer power off

  • Connect the power cable.

  • Use the power switch to turn the power on.

Post service test

After replacing major assemblies (for example, the document feeder) or internal parts (for example, the formatter board), perform the following post service tests.

  • When the power is turned on, listen for normal startup sounds.

  • Check the control-panel display for error messages.

  • Make sure that the printer initializes to a Ready state.

  • Copy, scan, or print a document. Verify the document copies, scans, or prints correctly

Remove the toner cartridge

Follow these steps to remove the toner cartridge.

  1. Rotate the dial on the front of the toner cartridge to the left (callout 1) until it stops, and then slide the toner cartridge out of the printer (callout 2).

    reinstallationtip:

    When reinstalling the toner cartridge, slide the cartridge into the printer only until the front of the cartridge is even with the front of the cartridge slot. Do not slide the cartridge all the way in the printer. Move the cartridge slightly in or out of the printer until you can rotate the dial to the right until it stops. Do not force the rotation of the dial.

    Remove the toner cartridge

    Remove the toner cartridge

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Bulgaria

hp-detect-load-my-device-portlet

Actions
Loading...