Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

hp-support-head-portlet

Actions

HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions

hp-share-print-widget-portlet

Actions

Information

Need Windows 11 help?
Check the information on compatibility, upgrade, and available fixes from HP and Microsoft. Windows 11 Support Center

Feedback

hp-concentra-wrapper-portlet

Actions

HP printer setup (Wi-Fi network)

Connect an HP printer to a local Wi-Fi network to wirelessly print from a personal computer, smartphone, or tablet.

Note:

If you are using a guest network, such as those found in many hotels or college campuses, connecting a device to your printer might not be possible over the network. Instead, use a Wi-Fi Direct connection to print.

Restore Wi-Fi setup mode on the printer

Many HP printers have a Wi-Fi setup mode that helps the HP software connect your printer to a network. Restore Wi-Fi setup mode if the printer is not found during software setup or when the wireless connection is lost.

Example of restoring Wi-Fi setup mode from a touchscreen (left) and with button presses (right)

Example of restoring Wi-Fi setup mode on touchscreens and with button presses

Most printers with a touchscreen display or menu: Open the Wireless or Setup menu, select Network setup or Settings, and then select Restore Network Settings.
Most printers without a touchscreen display or menu: Go to Restore Wi-Fi setup mode on your HP printer for steps using the buttons on your printer.

Install the HP Smart app

Use the HP Smart app to set up the printer on the Wi-Fi network and with your computer or mobile device.

Open the HP Smart app, and then create an account or sign in. If you do not have the app, download it from 123.hp.com or your app store.
Within two hours of restoring Wi-Fi setup mode, follow the guided steps in the HP Smart app to add the printer and set up the wireless connection.

For more information, go to HP printer setup (HP Smart app).

Additional Wi-Fi connection options

Use these methods to connect a printer if you changed your router or ISP, or a local network is unavailable.

Connect the printer with the Wireless Setup Wizard (printers with a touchscreen)

Use the Wireless Setup Wizard from the printer control panel to connect your printer to your Wi-Fi network.

Place the printer near the Wi-Fi router.
Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard.
Select the name of your network, and then enter the password to complete the connection.

Note:
If the Wireless Setup Wizard is not listed, select Wi-Fi Protected Setup or WPS, select Push Button, and then follow the steps to connect to the network.

Connect the printer with the Wireless Setup Wizard (printers without a touchscreen)

Temporarily connect your computer or mobile device to your printer's local network connection and then run the Wireless Setup Wizard from the printer's Embedded Web Server (EWS).

Open the list of available network connections on your device.

Note:
You can view the list of available networks in the Wi-Fi option of your device.
Select the network with HP=Setup <Your printer name> from the list, for example HP=Setup<EE_DeskJet 2700 series>, and then connect to the network. This connection is temporary and required to set up the network.

If your printer is not available in the list, restore the Wi-Fi setup mode. Press and hold the Wireless and Cancel buttons until the Power button blinks, and then wait for the Wireless light to blink.
Open an internet browser, and then enter 192.168.223.1 in the address bar.

Note:
If Your connection is not private message displays, click Show Advanced, and then Proceed to 192.168.223.1(unsafe).

The Printer EWS opens.
Enter the PIN found on the label located inside the cartridge access area.
Click Network > Wireless > Wireless Setup Wizard > Next.
Select the name of your Wi-Fi network, and then enter the network password.

The printer connects to the Wi-Fi network, and the Wireless light stops blinking.
If you are using a Virtual Private Network (VPN) connection, disconnect the VPN.
Download and install the HP Smart app from HP Smart - Microsoft Store (Windows, in English), or HP Smart - Mac App Store (macOS, in English).

If you are prompted to sign in with Microsoft to use the app across devices, you can sign in or click No, thanks to continue.
Open the HP Smart app, click Add Printer or the plus sign to search your printer, and then follow the on-screen instructions to add and set up the printer.

Connect the printer using Wi-Fi Protected Setup (printers without a touchscreen)

Use the Wi-Fi Protected Setup (WPS) button on your router to connect the printer to your Wi-Fi network.

Place the printer near the Wi-Fi router.
Put the printer in Wi-Fi Protected Setup (WPS) mode.
- Printers without a touchscreen control panel: On the control panel, press and hold the Wi-Fi button for 5 seconds until the light starts flashing.
- HP DeskJet 6000, 6400, ENVY 6000, 6400, and Tango printers: Press and hold the Wi-Fi and Power buttons on the back of the printer for 3 seconds until the Edge or Wireless light starts flashing.
Within two minutes, press and hold the WPS button on the router until the connection process begins.
Wait for the Wireless light or bar on the printer to stop flashing. The printer is now connected to the network.

Connect the printer using Wi-Fi Direct

Wi-Fi Direct is a method to temporarily connect your device directly to your printer.

Set up a Wi-Fi Direct connection to quickly and easily access your printer from your mobile device or computer.

hp-feedback-input-portlet

Actions

hp-feedback-banner-portlet

Actions

hp-country-locator-portlet

Actions

Country/Region: Flag

Bulgaria

hp-detect-load-my-device-portlet

Actions

hp-hero-support-search

Actions

Examples: "LaserJet Pro P1102 paper jam", "EliteBook 840 G3 bios update"