hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information
    Important Print Security Update

    HP was recently made aware of a vulnerability in certain inkjet printers by a third-party researcher. HP has updates available for download to address the vulnerability. Details and more information are available in the Security Bulletin

hp-concentra-wrapper-portlet

Actions
Loading...

HP Compaq nx7000 Notebook PC - Removing and Replacing the Inverter Board

Introduction
This document is provided to assist in removing and replacing the inverter board for the HP Compaq nx7000 Notebook PC.
Minimum skill level
The End-User must possess extensive product-specific knowledge and technical skill on how to service the system, and be familiar with the operating system.
Tools required
  • Small, Phillips-head P0 screwdrivers
  • Small, flat-bladed screwdriver or a flat-bladed alignment tool
Parts required
  note:
Part numbers are subject to change.
The replacement part number will vary depending on the inverter board that is being replaced. If a part is listed as "Yes" under "Requires Return" then the defective part needs to be returned to HP.
Description
Part Number
Requires Return
Display inverter board - For models with 15.4 in display
336994-001 (Original)
No
  note:
For customers in countries/regions with RoHS legislation* (e.g. EU, China, etc.) restricting the use of hazardous substances in electrical equipment. The use of the Original Spare part is regulated by RoHS legislation. If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as the replacement part. If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the replacement part. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit.
Summary of instructions
To view a video demonstrating the procedure for removing the inverter board, click on the link below. Or use the product video listing on the HP Services Media Library, (Click here to go to HP Service Media Library) then select Inverter board from the menu on the upper left hand side of the screen.
Click here to view the inverter board removal video (right-click on the link to open in a new window/tab).
Inverter board removal
  1. Review the safety considerations before performing the steps listed below by clicking on the following link:
      caution:
    Failure to comply with the precautions could result in damage to your product or loss of data.
  2. Disconnect the display panel cable from the end of the inverter board.
  3. Disconnect the inverter cable from the end of the inverter board.
  4. Remove the two 5 mm P0 Phillips-head screws that secure the inverter board to the display panel.
  5. Use a flat-bladed tool to carefully pry each end of the inverter board off of its guide pin and slide it out from under the metal display panel tab.
  6. Place the inverter board in a static dissipative bag.
Inverter board replacement
  1. Remove the inverter board from the static dissipative bag.
  2. Use a flat-bladed tool to carefully pry each metal display panel tab up enough to allow sliding the ends of the inverter board under them and onto the guide pins.
  3. Replace the two 5 mm P0 Phillips-head screws that secure the inverter board to the display panel.
  4. Reconnect the inverter cable to the end of the inverter board.
  5. Reconnect the display panel cable to the end of the inverter board.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Bulgaria

hp-detect-load-my-device-portlet

Actions
Loading...