hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

Evo N180 - Installing the Modem Board

Installing the Modem Board and Modem Cable

Removing the Modem Board

  1. Prepare the computer for disassembly.
  2. Turn the computer bottom side up with the front facing forward.
  3. Remove the expansion cover as described in the Memory Expansion Board Section.
  4. Disconnect the modem cable from the modem board 1 (Figure 5-9).
  5. Spread the retaining tabs 2 on each side of the modem board.

    The board releases and rests at an angle.
  6. Remove the modem board by pulling it away from the socket at an angle 3.

Installing the Modem Board

Reverse the above procedure to install a modem board.

Removing the Modem Cable

The modem cable is included in the Cable Kit (spare part number 253946-001).
  1. Prepare the computer for disassembly.
  2. Remove the system board.
  3. Turn the system board bottom side up with the rear panel facing forward.
  4. Disconnect the modem cable 1 from the modem and route it from between the modem connector 2 and the memory expansion 3 and video memory connectors 4 .
  5. Remove the tape 5 that secures the modem cable to the system board.
  6. Disconnect the modem cable from the system board 6 .

Installing the Modem Cable

Reverse the above procedure to install the modem cable.

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Bulgaria

hp-detect-load-my-device-portlet

Actions
Loading...