- Support Home
- Software and Drivers
- Contact Us
- Business Support
- My HP Account
When you scan, the computer file or printed output has vertical lines, incorrect colors, color bands, or poor resolution.
Examples of poor scan quality
Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.
If you are experiencing an issue with the quality of your printed scans, send a print job from the computer to confirm the quality issue is not printing-related.
If the quality issue occurs when printing from the computer, it is not scanning-related. Go to HP Customer Support, enter your printer model number, and then search for print quality to find the Fixing Poor Print Quality document.
If the quality issue occurs when scanning, it is most likely related to the scanner hardware or scan job settings.
Fingerprints, smudges, dust, or debris on the scanner glass, under the scanner lid, or in the document feed slot can cause lines and color bands. Clean these parts with a soft, lint-free cloth sprayed with glass cleaner.
Printer with flatbed scanner glass and lid
Printer with a document scan feeder
Clean the scanner glass and underside of the scanner lid with a soft, lint-free cloth sprayed with glass cleaner.
Turn off the printer and disconnect the power cord.
Lift the scanner lid.
Spray a soft, lint-free cloth with glass cleaner, and then wipe the scanner glass, glass strip (if present), the white backing under the scanner lid, and the white strip under the lid (if present) until clean, dry, and streak-free.
To protect the interior printer parts, do not spray the cleaner directly on the glass or on the underside of the lid.
White scanner lid backing
White ADF scanner lid strip (if present)
Glass ADF scanner strip (if present)
Main scanner glass
Reconnect the power cord, turn on the printer, and then close the scanner lid completely.
Clean the plastic and glass strips inside the document feeder with a soft, lint-free cloth sprayed with glass cleaner.
Some printers ship with a document feeder cleaning cloth. If you have the cloth, load it into the document feeder and start a scan job to clean the scanner mechanism.
Turn the printer off, disconnect the power cord, and then remove the rechargeable battery if your printer has one.
Depending on your printer model, open any top cover, document feeder tray, and scan document feeder cover.
Remove any debris such as bits of paper or paper clips from inside the document feeder.
Spray a soft, lint-free cloth with glass cleaner, and then wipe the scanner glass and the white strip on the underside of the document feeder until clean, dry, and streak-free.
To protect the interior printer parts, do not spray the cleaner directly on or into the printer.
Completely close any covers and trays that you opened.
Reconnect the power cord, reinstall the battery if necessary, and then turn on the printer.
Reset the printer to recover from printer errors or failures.
If your printer has a rechargeable battery, remove it.
Press the power button to turn off the printer. If the printer does not turn off, disconnect the power cord from the printer.
Unplug the power cord from the power source.
Wait 60 seconds.
Connect the power cord directly to a wall outlet and to the printer.
Turn on the printer to complete the reset.
If your printer has an ADF, clean it regularly to help avoid paper jams and quality problems.
Get a lint-free cloth and distilled water.
Remove the original document from the ADF.
Turn off the printer and disconnect the power cord.
Open the ADF cover.
Find the paper pick rollers and the separator pad inside the ADF.
Paper pick roller
Lightly dampen a clean, lint-free cloth with filtered or distilled water, and then squeeze any excess liquid from the cloth.
Use the damp cloth to clean the paper pick rollers and the separator pad.
Leave the ADF cover open for two minutes to allow the rollers and pad to dry.
Close the ADF cover.
Reconnect the power cord and turn on your printer.
Change the settings in the scan software to help improve the scan quality of your document or photo.
Available settings vary by printer model, scan software, and when scanning a document or a photo. For example, the PDF settings are only available for document scans.
Make sure the original document or photo is in good condition and free of tears, creases, folds, staples, or tape.
Place the original on the scanner glass or into the Automatic Document Feeder (ADF).
The ADF mechanism can damage photos. To copy or scan photos, use an alternate method, such as the scanner glass or your mobile device camera with the HP Smart app.
Open the scan software, and then find the scanner settings.
Change any of the following settings before scanning, if available.
Select the appropriate scan type: Make sure your scan type matches the object you are scanning for optimal quality.
Select either the color or greyscale scan option: If the original item is in color or greyscale, choosing to scan it in black and white can significantly degrade scan quality.
Increase the scan resolution: Increasing the resolution improves the scan quality, but it also increases scanning time and file size. A standard resolution of 300 dpi is acceptable for most text-based documents, while 600 dpi or higher is better for detailed photo scans.
Choose the appropriate file type: The file extension you choose can affect the final scan quality. For most scan jobs, PDF, JPEG, GIF, and PNG are acceptable file types.
Do not compress or reduce the file size: Compressing your scanned files produces smaller file sizes at a cost of lower image quality
Scan the document or photo.
A preview of the scan displays in the software.
On the preview screen, make any final scan adjustments, and then save the scan.
Service or replace your HP product if the issue persists after completing all the preceding steps.
Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.
To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.