hp-support-head-portlet

Actions
Loading...
HP Customer Support - Knowledge Base

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Information

    Fix and resolve Windows 10 update issue on HP Computer or Printer. Click here

hp-concentra-wrapper-portlet

Actions
Loading...

HP Color LaserJet Pro M452, MFP M477, M377 - Removal and replacement: Tray 3

Introduction

This document provides the procedures to remove and replace Tray 3.

Before performing service

Use the table below to identify the correct part number for your printer, and then go to https://parts.hp.com/hpparts to order the part.
Tray 3 part number
RM2-6486-000CN
Tray 3

Required tools

No special tools are required to install this part.

After performing service

Make sure that Tray 3 is fully closed after replacing it.

Step 1: Remove the tray

  1. Pull the tray out until it stops. Lift the front of the tray, and then pull it out of the printer to remove it.
    Figure : Remove the tray

Step 2: Unpack the replacement tray

Remove the new part from its package. Save all packaging for recycling the used part.
For complete information on HP's recycling programs, go to Product return and recycling.
note:
HP recommends responsible disposal of the defective part.
Recycle and unpack
Figure : Recycle and unpack

Step 3: Install the tray

  1. With the front of the tray slightly lifted, align the sides of the tray with the rails in the feeder, and then carefully slide the tray into the feeder. As the tray slides into the feeder, lower the front of the tray, and then close it.
    Figure : Install the tray

hp-feedback-input-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country/Region: Flag Australia

hp-detect-load-my-device-portlet

Actions
Loading...