solution Contentsolution Content

HP Designjet Z6200 Photo Printer Series - Solving paper-handling problems

Solving paper-handling problems

The front panel keeps indicating that paper Is misaligned or incorrectly positioned.
  • The roll may be loaded the wrong way. The paper should load over the roll toward you.
  • Check that the paper is correctly loaded onto the spindle.
  • The paper may be loaded at an angle. The right-hand edge must be aligned with the blue line on the Print Platen.
    note:
    Ensure that the paper is wrapped tightly on the roll. This is a very important step to remember because if this is not done, the paper may be loaded at an angle, causing the paper to be rejected.
  • The Line Sensor may be malfunctioning. See The Line Sensor has problems detecting paperThe Line Sensor has problems detecting paper.