hp-support-head-portlet

Actions
Loading...

Welcome to HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Scanjet 5590 Digital Flatbed Scanner - Performing a Self Test on an HP Scanjet 5590 Digital Flatbed Scanner

Purpose
This document explains how to perform a hardware self test on an HP Scanjet 5590 Digital Flatbed Scanner.
Performing a hardware self test
  1. Disconnect the USB, TMA, ADF, and power cables from the back of the scanner. Leave the power module connected to the power source.
  2. Press and hold the Copy and E-mail buttons on the front panel, and connect the power cable to the scanner. When the scanner LCD changes to flashing double zeros (00 ), release both of the buttons.
  3. Press and release the Scan Document button.
  4. During a successful base unit self test, the scanner will do the following:
    • The scanning lamp will light up.
    • The carriage will continuously move the full length of the scanning bed.
  5. To end the test, disconnect the power cable from the back of the scanner.
If the base unit self test results were as described above, then the test was successful.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag Australia

hp-detect-load-my-device-portlet

Actions
Loading...