Error:

In diesem Browser ist JavaScript inaktiviert. Diese Seite erfordert JavaScript. Ändern Sie Ihre Browser-Einstellungen, damit JavaScript ausgeführt werden kann. Genauere Anweisungen hierzu finden Sie in der Dokumentation Ihres Browsers.

hp-support-head-portlet

Aktionen

Ladevorgang läuft...

HP Kundensupport - Wissensdatenbank

hp-contact-secondary-navigation-portlet

Aktionen

Ladevorgang läuft...

hp-share-print-widget-portlet

Aktionen

Ladevorgang läuft...

Feedback

hp-concentra-wrapper-portlet

Aktionen

Ladevorgang läuft...

HP OfficeJet 200 Mobile Printers - Loading Paper, Envelopes, and Cards

This document is for the HP OfficeJet 200, 200c, 202, 202c Mobile Printer.

This document provides instructions for loading plain paper, envelopes, photo paper, and cards into the printer.

Hinweis:
Never load multiple types of paper in the input try. Load one type of paper at a time, and never load paper while the printer is printing.

Load plain paper

Load plain paper into the input tray before you print.

Open the top cover, and then lift the control panel.
Slide the two paper-width guides out as far as possible.

Abbildung : Sliding paper-width guides out as far as possible
Load 50 sheets of plain paper or less into the paper tray, and then slide the paper-width guides until they rest against the sides ofthe paper.

Abbildung : Sliding paper-width guides against the paper

Load envelopes

Load the printer with blank envelopes to print addresses for the recipient and the sender.

Open the top cover, and then slide the paper-width guides out as far as possible.

Abbildung : Sliding paper-width guides out as far as possible
Remove any paper from the input tray.

Vorsicht:
To avoid paper jams and damage to the printer, do not use shiny or embossed envelopes or envelopes that have clasps of windows.
Insert up to 5 envelopes in the input tray with the print-side up, and then slide the paper-width guides until they rest against the sides of the envelope. Position envelopes with the flap on the short edge with the flap up. Position envelopes with the flap on the long edge with the flap to the left.
Abbildung : Positioning the envelope in the tray

Envelope orientation for envelopes with the flap on the short edge

Envelope orientation for envelopes with the flap on the long edge

Load cards and photo paper

Load cards or photo paper into the input tray before you print.

Open the top cover, and then slide the paper-width guides out as far as possible.

Abbildung : Sliding paper-width guides out as far as possible
Remove all the paper from the input tray.
Insert up to 20 cards or photos with the print-side up, and then slide the paper-width guides until they rest against the sides of the cards or photos.

Abbildung : Sliding paper-width guides until they rest against the sides