HP Kundensupport - Wissensdatenbank

hp-contact-secondary-navigation-portlet

Aktionen
Ladevorgang läuft...

hp-share-print-widget-portlet

Aktionen
Ladevorgang läuft...

hp-concentra-wrapper-portlet

Aktionen
Ladevorgang läuft...

HP Compaq 8510w Mobile Workstation - Removing and Replacing the Wireless LAN Minicard

Introduction

This document is provided to assist in removing and replacing the Wireless LAN minicard for the HP Compaq 8510w Mobile Workstation.

Minimum skill level

The End User requires no hardware-specific training to replace the defective part. The End user should have familiarity with system hardware and software requiring repair.

Tools required

P1 Phillips-head screwdriver

Parts required

Hinweis:
Part numbers are subject to change.
The replacement part number will vary depending on the Wireless LAN minicard that is being replaced. If a part is listed as "Yes" under "Requires Return" then the defective part needs to be returned to HP. Click here for more information on returning parts to HP.
Description
Part Number
Requires Return
Wireless mini PCI 802.11a/b/g/n WLAN card (Intel, KDRN) - For wireless networks (Most-of-World)
441086-001 (Modified)
No
Wireless mini PCI 802.11a/b/g/n WLAN card (Intel, KDRN) - For wireless networks (Most-of-world 2)
441086-002 (Modified)
No
Wireless mini PCI 802.11a/b/g/n WLAN card (Intel, KDRN) - For wireless networks (Rest-of-world)
441086-003 (Modified)
No
Wireless mini PCI 802.11a/b/g/n WLAN card (Intel, KDRN) - For wireless networks (Japan)
441086-291 (Modified)
No
Broadcom 4311AG Wireless LAN 802.11a/b/g mini PCI adapter card (Bevo) - 54Mbps data rate, 2.4GHz operating frequency range (North America)
441075-001 (Modified)
No
Broadcom 4311AG Wireless LAN 802.11a/b/g mini PCI adapter card (Bevo) - 54Mbps data rate, 2.4GHz operating frequency range - For Rest of World (ROW)
441075-002 (Modified)
No
Broadcom 4311AG Wireless LAN 802.11a/b/g mini PCI adapter card (Bevo) - 54Mbps data rate, 2.4GHz operating frequency range (Japan)
441075-291 (Modified)
No
Wireless LAN 802.11a/b/g mini PCI adapter card (Intel, KDRN) - 54Mbps data rate, 2.4GHz operating frequency range (Most-of-world)
441082-001 (Modified)
Yes
Wireless LAN 802.11a/b/g mini PCI adapter card (Intel, KDRN) - 54Mbps data rate, 2.4GHz operating frequency range (Most-of-world 2)
441082-002 (Modified)
Yes
Wireless LAN 802.11a/b/g mini PCI adapter card (Intel, KDRN) - 54Mbps data rate, 2.4GHz operating frequency range (Rest-of-world)
441082-003 (Modified)
Yes
Wireless LAN 802.11a/b/g mini PCI adapter card (Intel, KDRN) - 54Mbps data rate, 2.4GHz operating frequency range (Japan)
441082-291 (Modified)
Yes
Wireless LAN 802.11b/g mini PCI adapter card (Broadcom, Hoya) - 54Mbps data rate, 2.4GHz operating frequency range (Most-of-world)
441090-001 (Modified)
No
Wireless LAN 802.11b/g mini PCI adapter card (Broadcom, Hoya) - 54Mbps data rate, 2.4GHz operating frequency range (Rest-of-world)
441090-002 (Modified)
No
Broadcom 4311AG Wireless LAN 802.11b/g mini PCI adapter card (Hoya) - 54Mbps data rate, 2.4GHz operating frequency range (Japan)
441090-291 (Original)
Yes
Wireless LAN module 802.11b/g GL (Intel) - (Japan)
448675-004 (Modified)
Yes
Mini PCI 802.11b/g GL WLAN module (for use in Israel, Jordan, Kuwait, Thailand, United Arab Emirates, and Ukraine)
409280-004 (Modified)
Yes
Hinweis:
For customers in countries/regions with RoHS legislation* (e.g. EU, China, etc.) restricting the use of hazardous substances in electrical equipment. The use of the Original Spare part is regulated by RoHS legislation. If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as the replacement part. If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the replacement part. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit.

Summary of instructions

To view a video demonstrating the procedure for removing the Wireless LAN minicard, click on the link below. Or use the product video listing on the HP Services Media Library (Click here to go to HP Services Media Library), then select Wireless LAN Minicard from the menu on the upper left hand side of the screen.
Click here to view the Wireless LAN minicard removal video (Right-click on the link to open in a new window/tab).

Wireless LAN minicard removal

  1. Review the safety considerations before performing the steps listed below by clicking on the following link:
      Vorsicht:
    Failure to comply with the precautions could result in damage to your product or loss of data.
  2. Carefully disconnect the wireless antenna cables from the Wireless LAN minicard by grasping the connectors with a small needlenose pliers or tweezers.
    Hinweis:
    Use care when disconnecting the wireless antenna cables from the Wireless LAN minicard. Damaged cables or connectors can degrade notebook performance.
    Hinweis:
    If three antenna cables are connected to the Wireless LAN minicard, the black cable connects to terminal 1, the white cable connects to terminal 2, and the yellow cable connects to terminal 3. If two antenna cables are connected to the Wireless LAN minicard, the black cable connects to the MAIN terminal and the white cable connects to the AUX terminal.
  3. Remove the two 3 mm P1 Phillips-head screws that secure the Wireless LAN minicard to the system board and allow it to release to the spring tension position.
  4. Grasp the Wireless LAN minicard by the edges and pull gently to remove it.
  5. Place the Wireless LAN minicard in a static dissipative bag.

Wireless LAN Minicard replacement

  1. Remove the Wireless LAN minicard from the static dissipative bag.
  2. Locate the alignment slot and align it to the board receptacle.
  3. Grasp the Wireless LAN minicard by the edges and push gently to replace it.
  4. Press the Wireless LAN minicard down and replace the two 3 mm P1 Phillips-head screws that secure the Wireless LAN minicard to the system board.
  5. Reconnect the wireless antenna cables to the Wireless LAN minicard.
    Hinweis:
    Use care when connecting the wireless antenna cables to the Wireless LAN minicard. Damaged cables or connectors can degrade notebook performance
    Hinweis:
    If three antenna cables are connected to the Wireless LAN minicard, the black cable connects to terminal 1, the white cable connects to terminal 2, and the yellow cable connects to terminal 3. If two antenna cables are connected to the wireless LAN minicard, the black cable connects to the MAIN terminal and the white cable connects to the AUX terminal.

Parts return



Land/Region: Flag Österreich

hp-detect-load-my-device-portlet

Aktionen
Ladevorgang läuft...