hp-support-head-portlet

Acciones
Cargando...
Soporte al cliente de HP: base de conocimientos

hp-contact-secondary-navigation-portlet

Acciones
Cargando...

hp-share-print-widget-portlet

Acciones
Cargando...
  • Información
    Aclaración de Hoja de Garantía en Impresoras

    Hojas de Garantía con información no actualizada fueron adjuntadas en algunas Impresoras en Argentina, para conocer más detalles leer Fe de Erratas.

hp-concentra-wrapper-portlet

Acciones
Cargando...

HP EliteBook 8440p Notebook PC - Removing and Replacing Optical Drive

Introduction

This document is provided to assist in removing and replacing the Optical drive for the HP EliteBook 8440p Notebook PC.

Minimum skill level

The End User requires no hardware-specific training to replace the defective part. The End user should have familiarity with system hardware and software requiring repair.

Tools required

Captive, Phillips-head (P1) screwdrivers.

Parts required

nota:
Part numbers are subject to change.
The replacement part number will vary depending on the Optical drive that is being replaced. If a part is listed as "Yes" under "Requires Return" then the defective part needs to be returned to HP. Click here for more information on returning parts to HP.
Description
Part Number
Requires Return
Blu-ray ROM DVD±RW SuperMulti DL Drive
594040-001 (Modified)
Yes
Blu-ray R/RE DVD±RW SuperMulti Drive
594041-001 (Modified)
Yes
DVD-ROM Drive
594042-001 (Modified)
Yes
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
594043-001 (Modified)
Yes
nota:
For customers in countries/regions with RoHS legislation* (e.g. EU, China, etc.) restricting the use of hazardous substances in electrical equipment. The use of the Original Spare part is regulated by RoHS legislation. If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as the replacement part. If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the replacement part. In this case either the Original Spare or the Modified Spare may be shipped which will not affect performance or functionality of the unit.

Summary of instructions

To view a video demonstrating the procedure for removing the optical drive, click on the link below. Or use the product video listing on the HP Services Media Library (Click here to go to HP Service Media Library), then select Optical Drive from the menu on the upper left hand side of the screen.
Click here to view the optical drive removal video (right-click on the link to open in a new window/tab).

Optical drive removal

  1. Review the safety considerations before performing the steps listed below by clicking on the following link:
      atención:
    Failure to comply with the precautions could result in damage to your product or loss of data.
  2. On the bottom of the notebook, loosen the captive P1 Phillips-head screw that secures the optical drive to the bottom of the base enclosure.
  3. Turn the notebook right side up.
  4. Insert a paper clip or thin metal rod into the manual release hole on the front bezel of the optical drive and press firmly.
  5. Grasp the side rails of the drive tray to pull the optical drive out and remove.
  6. Push the drive tray back into the optical drive.

Optical drive replacement

  1. Insert the optical drive into the base enclosure until the connector is seated.
  2. Turn the notebook upside down.
  3. Replace the two P1 Phillips-head screws that secures the optical drive to the bottom of the base enclosure.

Parts return


hp-feedback-input-portlet

Acciones
Cargando...

hp-feedback-banner-portlet

Acciones
Cargando...

hp-country-locator-portlet

Acciones
Cargando...
País/región: Flag Argentina

hp-detect-load-my-device-portlet

Acciones
Cargando...