hp-support-head-portlet

Acciones
Cargando...
Soporte al cliente de HP: base de conocimientos

hp-contact-secondary-navigation-portlet

Acciones
Cargando...

hp-share-print-widget-portlet

Acciones
Cargando...
  • Información

    ¿Problemas de audio o sonido? ¡Pruebe nuestro automatizado HP Audio check!

    Información

    Arregle y solucione problemas de actualización de Windows 10 en una Computadora o Impresora HP. Haga clic aquí

    Información
    ¡Cree una cuenta HP hoy!

    Conéctese con el soporte de HP de manera más rápida, administre todos sus dispositivos en un solo lugar, vea la información de garantía y más. Más información

    Información
    Aclaración de Hoja de Garantía en Impresoras

    Hojas de Garantía con información no actualizada fueron adjuntadas en algunas Impresoras en Argentina, para conocer más detalles leer Fe de Erratas.

hp-concentra-wrapper-portlet

Acciones
Cargando...

Setting Up the Printer Hardware for the HP Photosmart C4700 All-in-One Printer Series

Introduction

This document explains how to set up the physical parts of the product. Complete these steps before you install the product software on your computer.
This document includes the following steps to set up the product:
  • Unpack the All-in-One
  • Check the contents of the box
  • Connect the power cord and adapter
  • Turn on power
  • Select the language/region
  • Install the cartridges
  • Load plain paper
  • Align the cartridges

Setting up the All-in-One

Follow these steps in order.

Step one: Unpack the All-in-One

  1. Lower both the paper tray and the cartridge door.
    Figura : Lower the paper tray
  2. Remove all packing material and protective film from the product.
    Figura : Remove the packing material
  3. Close the cartridge door.
    Figura : Close cartridge door

Step two: Check the contents of the box

The contents might vary by country/region. See the packaging for a list of items shipped in the box.

Step three: Connect the power cord and adapter

nota:
Do not connect the USB cable.
  1. Connect the power adapter to the back of the product.
  2. Connect the power cord to the power adapter.
  3. Connect the other end of the power cord to an alternating current (AC) power outlet.
Figura : Connect the power cord and adapter

Step four: Turn on power

Press the Power button () to turn on the product.
Figura : Press Power

Step five: Select the language/region

Follow the instructions on the control panel display to set the default language and country/region for the product.
  1. Press the colored buttons to the left of the display to select the up arrow () or down arrow () icons on the display until your language is selected.
  2. Press OK to confirm.
  3. Press the colored buttons to the left of the display to select the up arrow () or down arrow () icons on the display until your country/region is selected.
  4. Press OK to confirm.

Step six: Install the cartridges

Leave the product turned on and follow these steps to install the cartridges.
  1. Open the cartridge door. Make sure the carriage moves to the center. If it does not move to the center, turn the product off, and then turn it back on again.
    Figura : Open the cartridge door
  2. Remove the cartridges from their packaging, and then remove the pink protective tape from both cartridges.
      atención:
    Do not touch the copper-colored contacts or re-tape the cartridges.
    Figura : Remove the pink tape
    Figura : Do not touch contacts
  3. Hold the cartridges with the label on top.
    Figura : label on top
  4. Insert the tri-color cartridge into the left carriage slot and insert the black cartridge into the right carriage slot.
    Figura : Tri-color cartridge in the left slot
  5. Press the cartridges firmly into the carriage until they snap into place.
    Figura : Insert cartridges until they snap into place
  6. Close the cartridge door.
    Figura : Close cartridge door
  7. Press OK to confirm the installation of genuine HP cartridges, when prompted.

Step seven: Load plain paper

  1. Pull out the tray extender, and then flip open the paper catch.
    Figura : Pull out tray extender
  2. Load paper in the input tray with the short edge forward and the print side down. Slide the stack forward until it stops.
    Figura : Load paper
    nota:
    Make sure all the paper in the stack is the same size and type and free from rips, dust, wrinkles, and curled or bent edges.
  3. Slide the paper-width guide inward until it stops at the edge of the paper.
  4. Press OK.

Step eight: Align the cartridges

When you install a new cartridge, the product aligns the cartridges. You can also align the cartridges at any time using the product software. Aligning the cartridges helps produce high quality output.
  1. Follow the instructions on the control panel display to print the alignment page.
    Figura : Alignment page prints
  2. Lift the lid.
  3. Load the alignment page face down in the front right corner of the glass.
    Figura : Load alignment page
  4. Close the lid, and then press OK to complete the alignment.

hp-feedback-input-portlet

Acciones
Cargando...

hp-feedback-banner-portlet

Acciones
Cargando...

hp-country-locator-portlet

Acciones
Cargando...
País/región: Flag Argentina

hp-detect-load-my-device-portlet

Acciones
Cargando...