hp-support-head-portlet

Acciones
Cargando...
Soporte al cliente de HP: base de conocimientos

hp-contact-secondary-navigation-portlet

Acciones
Cargando...

hp-share-print-widget-portlet

Acciones
Cargando...
  • Información

    ¿Problemas de audio o sonido? ¡Pruebe nuestro automatizado HP Audio check!

    Información

    Arregle y solucione problemas de actualización de Windows 10 en una Computadora o Impresora HP. Haga clic aquí

    Información
    ¡Cree una cuenta HP hoy!

    Conéctese con el soporte de HP de manera más rápida, administre todos sus dispositivos en un solo lugar, vea la información de garantía y más. Más información

    Información
    Aclaración de Hoja de Garantía en Impresoras

    Hojas de Garantía con información no actualizada fueron adjuntadas en algunas Impresoras en Argentina, para conocer más detalles leer Fe de Erratas.

hp-concentra-wrapper-portlet

Acciones
Cargando...

HP Officejet Pro K5300 and K5400 Printer Series - Installing Ink Cartridges

Introduction

This document describes how to install the ink cartridges and printheads.

Step one: Install the ink cartridges

nota:
You must install all four cartridges for the device to work correctly.
  1. Open the cover.
  2. Remove each cartridge from its package.
    Figura : Cartridge and package
    Cartridge and package
  3. Align the cartridge with the color coded slot, and then insert the cartridge into the slot.
    Figura : Insert the cartridge
    Insert the cartridge
  4. Press down firmly on the cartridge until it snaps into place.
  5. Repeat steps 2 through 4 for each cartridge.
  6. Close the cover.
    Figura : Close the cover
    Close the cover

Step two: Prepare the printheads

  1. Rapidly shake the printhead package five or six times before opening it.
    Figura : Shaking the printhead package
      atención:
    Do not shake the printheads after removing the orange protective caps.
  2. Open the printhead package and remove the printhead.

Step three: Install the printheads

  1. Open the cover.
  2. Open the printhead latch by gently lifting up on it.
    Figura : Lift the printhead latch
    Lift the printhead latch
  3. Remove the orange caps from the printhead.
    Figura : Remove the orange caps
    Remove the orange caps
  4. Insert the printhead into the color coded slot.
    Figura : Insert the printhead
    Insert the printhead
  5. Pull the printhead latch all the way forward, and then press down to properly engage the latch.
    Figura : Engage the latch
    Engage the latch
  6. Press down firmly on the printheads to before closing the printhead latch.
  7. Close the cover.
  8. After you close the cover, the product initializes and aligns the printheads automatically. The product prints an alignment page after it completes the process.

Step four: Align the printheads

After installing the printheads, the printer automatically aligns the printheads to ensure the best print quality. If the printer does not print the alignment page automatically, start the alignment process manually. Follow the steps below to start the alignment process manually.
  1. Press and hold the Power button ().
  2. Press the Resume button () three times, and then release the Power button (). The alignment process starts.

hp-feedback-input-portlet

Acciones
Cargando...

hp-feedback-banner-portlet

Acciones
Cargando...

hp-country-locator-portlet

Acciones
Cargando...
País/región: Flag Argentina

hp-detect-load-my-device-portlet

Acciones
Cargando...