HP Designjet 230/250C Printers - Plots Larger Than ANSI B Size are Clipped
What can I do when plotting from Windows 3.x or 95 and using the HP driver, the plots are being clipped on page sizes greater than ANSI B (11 x 17 inches)?
Within Windows 3.x and 95 printer setup, check to ensure you have the correct printer driver/HP DesignJet 230/250C model number selected.
HP DesignJet 230 D-size model printer = C4694A, E-size model = C4695A
HP DesignJet 250C D-size model printer = C3190A, E-size model = C3191A
To check the model number, open the top cover door of the HP DesignJet printer and look on the inside of the cover door. The model number and the serial number of the printer should be visible. The model number must match the model next to the driver name within Windows 3.x and 95 printer driver setup selection. Delete the current driver selection, reload the HP Windows 3.x and 95 printer driver. When prompted for selecting the correct model HP DesignJet printer, select the appropriate model number.
Ask the community!
Country: South Africa