solution Contentsolution Content

HP LaserJet Pro Printers - Blinking Lights

This document is for the LaserJet Pro M12a, M12w, P1102, P1102s, P1102w, P1106, P1108, P1109, and P1109w printers.
The lights on the control panel indicate the printer status. These lights can be on, off, or blinking, depending on the status of the printer. The lights can all blink in distinct patterns to indicate the printer status or potential error conditions.
    Figure : HP LaserJet Pro M12a, P1102, P1102s, P1106, P1108, and P1109 printers
    Printer view of HP LaserJet Pro M12a, P1102, P1102s, P1106, P1108, and  P1109 printer control panel
  1. Attention light
  2. Ready light
    Figure : HP LaserJet Pro M12w, P1102w, and P1109w printers
    Printer view of HP LaserJet Pro M12w, P1102w, and P1109w  printer control panel
  1. Wireless button
  2. Wireless light
  3. Attention light
  4. Ready light
  5. Cancel button

Service the printer

Service or replace your HP product if the issue persists after completing all the preceding steps.
Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.
To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.