hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Photosmart A610, A612, A616, A617, and A618 Printers - Set Up the Hardware

Introduction
Follow the instructions below to set up the printer hardware. This document does not explain how to install the software or operate the unit.
Setting up the hardware
Step one: Remove all tape and cardboard from the product
Remove the tape, packing material, and protective film from inside and around the camera and printer.
Step two: Check the contents of the box
The contents might vary by country/region. See the packaging for a list of items shipped in the box.
Step three: Connect the power cord
    Figure : Connecting the power cord
  1. Connecting the power cord to the back of the printer
  2. Plugging the power cord into an outlet
  1. Plug the printer end of the power cord into the back of the printer.
  2. Plug the remaining end of the power cord into a grounded wall outlet or surge protector.
  3. Press to turn on the printer.
Step four: Set the language and country/region
    Figure : Printer screen and control panel
  1. On button
  2. Printer screen
  3. 4-way arrow button
  4. OK button
  1. When Select Language displays on the printer screen, press or on the printer to scroll through the languages until the desired language is highlighted.
  2. Press OK on the printer to select the highlighted language.
  3. When Set LCD language to (your language) displays on the printer screen, press or to highlight Yes.
  4. Press OK.
  5. When Select country/region displays on the printer screen, press or on the printer to highlight your country/region.
  6. Press OK.
Step five: Prepare the print cartridge
  1. Open the print cartridge package.
  2. Pull the pink pull-tab to remove the clear tape from the print cartridge.
Figure : Pulling the pink pull-tab
 caution:
Do not touch or remove the ink nozzles or the copper-colored contacts.
Figure : Do not touch print cartridge contacts
Step six: Install the print cartridge
  1. Open the output tray. The input tray opens and the printer screen pops up automatically.
  2. Open the print cartridge door.
      Figure : Opening the output tray and print cartridge door
    1. Input tray
    2. Print cartridge door
    3. Output tray
  3. Insert the print cartridge into the print cartridge cradle with the label facing up and the copper-colored contacts facing the inside of the printer.
      Figure : Inserting the print cartridge
    1. Print cartridge cradle
  4. Push the print cartridge into the cradle until it snaps into place.
  5. Close the print cartridge door.
Step seven: Print an alignment page
Printing an alignment page ensures high print quality.
    Figure : Printing an alignment page
  1. Glossy side
  2. Paper-width guide
  3. Input tray
  4. OK button
  1. Place a few sheets of HP Advanced Photo paper (sample pack included) in the input tray with the glossy sides facing toward the front of the printer.
  2. Slide the paper to the left side of the input tray.
  3. Adjust the paper-width guide to fit close to the right edge of the paper without bending the paper.
  4. Press OK. An alignment page prints on the first sheet of photo paper. Follow the instructions on the printer screen.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
United States

hp-detect-load-my-device-portlet

Actions
Loading...