HP Customer Support




  • Alert
    Need help after upgrading to Windows 10?

    Here are solutions to common problems seen after upgrading.

    View article
    AC Power Cord Safety Recall and Replacement Program


    View article



HP Notebook PCs - Troubleshooting HDMI Display and Sound Issues

This document pertains to HP or Compaq Notebook PCs with a High-Definition Multimedia Interface (HDMI) connector.
When connecting your computer to a high-definition multimedia interface (HDMI) device, such as your LCD TV or surround sound speakers, you might encounter certain display or sound issues. Use the information in this document to check your settings and to troubleshoot specific problems.
Using correct HDMI cable for your HDMI device
Most HDTV devices have more than one HDMI input port, therefore it is very important that the TV's input source is set to the same HDMI port that is connected to your computer (i.e., HDMI2 to HDMI2).
If your computer and HDMI device use different cable types, you can purchase adapters. See Overview of HDMI and DVI Connections for PCs for more information.
Figure : HDMI 19-pin (Normal)
HDMI 19-pin (Normal)
Setting HDMI sound output
Windows outputs sound to only one device at a time. Select the desired output device by setting the default device and then the sound changes to the correct devices as cables are connected or disconnected. When switching between the sound on the computer and the sound on an external monitor or TV, open the sound devices to ensure the correct output device is selected.
If the device has not been previously configured, when checking the sound properties, the ATI HDMI output does not display unless an HDMI cable is connected between an HDMI device and the HDMI port on the computer.
Depending on the operating system installed and the type of sound chip being used, the images displayed in this document might differ from what you observe when following these instructions on your computer.
Use the steps below to configure the audio output when an HDMI cable is connected. Completing these steps allows you to select HDMI as the default when you are using an HDMI connection. When you are not using an HDMI connection, the sound settings default to your computer's speakers and headphones.
  1. Connect the HDMI cable to your computer and to your output device.
  2. Click the Start button, type sound in the Search field, and then select Sound from the list.
    The Sound window opens.
  3. On the Playback tab, select Speakers and Headphones, and then click the Set Default button.
    Figure : Sound window - Speakers and Headphones
    Playback tab with Speakers and Headphones selected
  4. Select ATI HDMI Output to make HDMI the default sound playback device, and then click the Set Default button.
  5. Right-click the ATI HDMI Output, and then select Show Disconnected Devices option. The HDMI cable must be connected when it is configured.
    Figure : Sound window - ATI HDMI Output
    Playback tab with ATI HDMI Output selected
To view all the available sound devices, right-click any device shown in the Sound window and select the Show Disabled Device and Show Disconnected Devices options.
Using the Windows sound troubleshooter
To open the troubleshooter, use the following steps:
  1. In Windows 7, click the Start button , and then click Control Panel.
    In Windows 8, type Control Panel on the Windows Start screen to open the Search charm, and then click Control Panel in the search results.
    Figure : Finding the Control Panel
    typing control panel into the search charm
  2. In the search bar at the top right, type troubleshooting, and click Troubleshooting in the search results.
    Figure : Navigate the Troubleshooting page
    Navigating to the troubleshooting page in the control panel
    Your Control Panel may look different depending on your operating system.
  3. On the Troubleshooting page, click Troubleshoot audio playback, under Hardware and Sound.
    Figure : Click Troubleshoot audio playback
    Click Troubleshooting audio playback
  4. Administrator permission is required to run this program. If prompted, type the administrator password or provide confirmation.
Troubleshooting specific HDMI issues
The following describes some troubleshooting tips you can use when encountering HDMI issues.








Country: Flag United States