Red Hat Enterprise Linux 5.7( 2.6.18-274.12.1.el5 )
Emulex OneConnect 10Gbps NIC
be2net module 4.0.100r
be2net driver version: 2.102.518rfirmware\-version: 2.101.374.0
HP Customer Support
Red Hat Enterprise Linux 5 - Update7: be2net Driver Fails to Initialize
Following message is observed in message file:
be2net 0000:10:00.0: Error in cmd completion - opcode 103, compl 2, extd 30df630040 be2net 0000:10:00.0: Error in cmd completion - opcode 90, compl 2, extd 300df630140 be2net 0000:10:00.0: Emulex OneConnect 10Gbps NIC initialization failed be2net: probe of 0000:10:00.0 failed with error -1
When ifup eth0 command is issued:
Device eth0 has different MAC address than expected, ignoring.
Install kernel-2.6.18-308.el5.x86_64.rpm or newer. It looks a bug in 2.6.18-274.12.1.el5.
note:2.6.18-307.el5.x86_64.rpm will be shipped in RHEL 5.8 and its release date falls in Feb, 2012.
Upgrade firmware of Emulex to 220.127.116.11 or newer.
For more details refer to the below Red Hat article:
NOTE: One or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside of the HP Web site.
Ask the community!