hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

Removing and Replacing the Front Bezel for HP Slimline s5-1000 and 400-000 Desktop PCs

This document applies to HP Slimline s5-1000 400-000 and series desktop computers.
HP Slimline s5-1000 series desktop computer
HP Slimline 400-000 series desktop computer
Before you begin
  • Remove any disc from the CD or DVD drive.
  • Turn off the computer, and then disconnect all cables. Disconnect the Ethernet or modem cable before disconnecting the power cord.
  • Move the computer to a clear, flat, stable work surface over a non-carpeted floor.
  • HP strongly recommends the use of an anti-static wrist strap and a conductive foam pad when working on the computer.
 warning:
The edges of metal panels can cut skin. Be careful not to slide skin along any interior metal edge of the computer.
 caution:
This product contains components that can be damaged by electrostatic discharge (ESD). To reduce the chance of ESD damage, work over a noncarpeted floor, use a static dissipative work surface (such as a conductive foam pad), and wear an ESD wrist strap connected to a grounded surface.
Video overview
View the following video before using the steps in this article.
 note:
For best quality on dial-up connections, wait until the video has fully loaded before viewing.
Removing and replacing the front bezel
Remove the front bezel to access the hard drive and other internal components.
Removing the front bezel
Use the following steps to remove the front bezel.
Step 1
To remove the front bezel, first remove the side panel.
For more information about removing the side panel, refer to the HP support document Removing and Replacing the Side Panel.
Pulling off the panel
Step 2
Unlatch the three tabs on the side of the front bezel.
Unlatching the tabs
Step 3
Rotate the bezel away from the computer.
Rotating out the bezel.
Replacing the front bezel
Use the following steps to replace the front bezel:
Step 1
Find the six small tabs on the front bezel.
Finding the six  tabs
Step 2
Find the six slots inside the computer.
Finding the six slots
Step 3
Align the tabs on the right side of the front bezel with the slots on the computer.
Aligning the tabs
Step 4
Rotate the bezel into place.
Rotating the bezel
Step 5
Snap the left tabs firmly into place.
Snapping the tabs
Step 6
Replace the side panel.
For more information about replacing the side panel, refer to the HP support document Removing and Replacing the Side Panel.
Replacing the panel

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
United States

hp-detect-load-my-device-portlet

Actions
Loading...