hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Deskjet D1600 Printers - 'Cartridge(s) Problem', or 'Incompatible Cartridge' Message Displays

This document is for the Deskjet D1658, D1660, D1663, and D1668 printers.
The message 'Cartridge(s) Problem', or 'Incompatible Cartridge' displays on the computer. The printer does not print, and the Power button might blink.
HP recommends that you use genuine HP ink or toner supplies. HP cannot guarantee the quality or reliability of non-HP or refilled cartridges. If you do not use genuine HP cartridges, the steps in this document might not resolve print quality issues.
Visit HP SureSupply to check ink or toner cartridge compatibility, or purchase replacement cartridges.
  1. Scroll to the bottom of the page, and then make sure the country/region location is correct.
  2. Follow the on-screen instructions to order new cartridges or check cartridge compatibility with your printer.
You can also purchase genuine HP cartridges from other retailers.
  • If these steps resolved the issue, you do not need to continue troubleshooting.
  • If the issue persists, continue to the next solution.
Solution two: Remove, inspect, and reseat the cartridges
The cartridge might not have full electrical contact with the product. Removing and reinstalling the cartridge might help.
  1. Make sure that the product is on. If necessary, press the Power button to turn on the product.
     caution:
    If the product is not on, it will not release the cartridges. You might damage the product if the cartridges are seated incorrectly when you try to remove them.
  2. Open the cartridge cover.
    Figure : Open the cartridge cover
    Illustration of opening the cartridge cover
    The cartridge carriage moves to the center of the product.
  3. Wait until the carriage is idle and silent, and then lightly press down on a cartridge to release it.
      Figure : Remove the cartridge
      Illustration of removing the cartridges
    1. The tri-color cartridge is on the left side of the carriage
    2. The black cartridge is on the right side of the carriage
  4. Pull the cartridge toward you out of its slot, and then inspect it.
     caution:
    Do not touch the copper-colored electrical contacts or the ink nozzles.
      Figure : Cartridge contacts and nozzles
      Illustration of the cartridges
    1. Copper-colored electrical contacts (do not touch)
    2. Nozzles (do not touch)
    • Check the copper-colored electrical contacts for debris.
    • Make sure that no clear protective tape remains on the contacts or nozzles.
      Figure : Remove the protective tape
      Illustration of the copper electrical strip
       caution:
      Do not try to remove the copper electrical strip.
    • Check the number on the cartridge label to make sure it is compatible with the product, and then compare it with the following table.
        Figure : Number on cartridge label
        Illustration of cartridge numbers
      1. Cartridge numbers
      Cartridge Description
      Abbreviated Country/Region Zone*
      North and South America, Korea (Zone 1)
      Europe (Zone 2)
      Russia, Japan (Zone 3)
      China, India (Zone 4)
      Black cartridge (standard yield)
      HP 60
      HP 300
      HP 121
      HP 818
      Color cartridge (standard yield)
      HP 60
      HP 300XL
      HP 121XL
      HP 818XL
      Black cartridge (high yield)
      HP 60XL
      HP 300
      HP 121
      HP 818
      Color cartridge (high yield)
      HP 60XL
      HP 300XL
      HP 121XL
      HP 818XL
      To find a complete list of compatible cartridges, do the following:
      1. Type your product number, and then press Enter.
        A list of compatible cartridges displays.
  5. If the cartridge is compatible with the product, reinstall it in the product.
    • Hold the cartridge with the HP logo on top, and then insert the cartridge back into the carriage slot. Push the cartridge firmly into the slot until it snaps into place.
      Figure : Insert the cartridge into the carriage
      Illustration of how to insert a cartridge
    • The tri-color cartridge installs in the left carriage slot.
    • The black cartridge installs in the right carriage slot.
  • If these steps resolved the issue, you do not need to continue troubleshooting.
  • If the issue persists, continue to the next solution.
Solution three: Clean the electrical contacts
Follow these steps to clean the electrical contacts.
  1. Gather the following materials:
    • Distilled water (tap water can contain contaminants that can damage the cartridge)
    • Cotton swabs or other soft, lint-free material that will not stick to the electrical contacts
    • Clean sheet of paper
  2. Open the cartridge cover.
    Figure : Open the cartridge cover
    Illustration of opening the cartridge cover
    The carriage moves to the center of the product.
  3. Wait until the carriage is idle and silent, and then lightly press down on a cartridge to release it.
      Figure : Remove the cartridge
      Illustration of removing the cartridges
    1. The tri-color cartridge is on the left side of the carriage
    2. The black cartridge is on the right side of the carriage
  4. Place the cartridges on a sheet of paper with the copper strips facing up.
     caution:
    Do not leave the cartridges out of the product for more than 30 minutes.
  5. Lightly moisten a cotton swab with distilled water, and then squeeze any excess water from the swab.
  6. Hold the ink cartridge by its sides, and then clean only the copper-colored contacts.
     caution:
    Do not touch the ink nozzles. Doing so can result in clogs, ink failure, and bad electrical connections.
      Figure : Clean cartridge contacts
      Illustration of cleaning the contacts
    1. Copper-colored contacts
    2. Ink nozzles (do not clean)
  7. Repeat this process until no ink residue or debris shows on the swab.
  8. Either let the cartridge sit for ten minutes to allow the cleaned area to dry, or use a new swab to dry it.
  9. Hold the cartridge with the HP logo on top, and then insert the cartridge back into the carriage slot. Push the cartridge firmly into the slot until it snaps into place.
    Figure : Insert the cartridge into the carriage
    Illustration of how to insert a cartridge
    • The tri-color cartridge installs in the left carriage slot.
    • The black cartridge installs in the right carriage slot.
  10. Close the cover.
    Figure : Close the cover
    Illustration of closing the cover
  • If these steps resolved the issue, you do not need to continue troubleshooting.
  • If the issue persists, continue to the next solution.
Solution four: Repeat reseating and cleaning steps
If you completed all the steps and the issue continues, repeat Solutions one and two in this document to inspect the cartridges and clean the electrical contacts.
  • If these steps resolved the issue, you do not need to continue troubleshooting.
  • If the issue persists, continue to the next solution.
Solution five: Replace the cartridges
Follow these steps to replace the cartridges in the product.
If you have a defective cartridge or printhead, it might be under warranty. To check the warranty on your ink or toner supplies, go to hp.com/go/learnaboutsupplies, select your country/region, and then review the limited warranty information for your supplies.
Step one: Remove the original cartridge
  1. Press the Power button to turn on the product.
  2. Open the cartridge door.
    Figure : Open the cartridge door
    Illustration of the product's cartridge door opening.
  3. Wait for the carriage to move to the center of the product.
  4. When the carriage stops, press down on the cartridge to release it, and then remove it from the slot.
    Figure : Press down on the cartridge
    Illustration of how to press down on the cartridge
     note:
    If replacing both cartridges, note their positions on the carriage. The tri-color cartridge occupies the left slot, and the black cartridge occupies the right slot.
Step two: Insert the new cartridge
  1. Remove the cartridge from its packaging.
    Figure : Remove the cartridge from its package
    Illustration showing the cartridge removed from its packaging.
  2. Carefully pull the pink pull-tab to remove the plastic tape.
    Figure : Remove the plastic tape from the cartridge
    Illustration showing plastic tape being removed from cartridge
     caution:
    Do not touch the copper-colored electrical contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.
    Figure : Do not touch the electrical contacts or the ink nozzles on the cartridge
    Illustration cautioning against touching the cartridge's electrical contacts or ink nozzles
  3. Slide the cartridge into the slot, and then press your thumb firmly on the cartridge until it clicks into place.
     note:
    The cartridge drops slightly as it approaches its seat on the carriage. Allow it to do so, and then continue to push until the cartridge clicks into place.
    Figure : Press the cartridge into the slot firmly
    Illustration of thumb pushing cartridge into slot
  4. Follow these same steps to replace the other cartridge, if necessary.
  5. Close the cartridge door only. Leave the paper tray down.
    Figure : Close the cartridge door - leave the paper tray down
    Illustration of cartridge door closing
Step three: Align the new cartridges
  1. Make sure that the paper tray contains paper.
  2. Open HP Solution Center:
    • Windows XP: On the Windows taskbar, click Start, click All Programs, point to HP, and then click HP Solution Center.
    • Windows Vista: On the Windows taskbar, click the Windows icon (), click All Programs, point to HP, and then click HP Solution Center.
  3. Click Open Toolbox. The printer Toolbox window opens.
  4. Click Align the Print Cartridges. The Align the Print Cartridges window opens.
  5. Click Align. The product aligns the cartridges, calibrates the product, and prints a test page.
  6. Wait for the test page to print, and then follow the on-screen instructions.
  7. Click Done.
  • If these steps resolved the issue, you do not need to continue troubleshooting.
  • If the issue persists, continue to the next solution.
Contacting HP for service in all countries/regions except Asia Pacific.
If you completed all the preceding steps and your product still has an issue, service the product.
Check your product warranty to determine if your product is still under warranty, and then go to Contact HP Support to schedule a repair or replacement.
Repair fees might apply for out-of-warranty products.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag United States

hp-detect-load-my-device-portlet

Actions
Loading...