The following figure shows the location of the system hard drive.
Figure : Location of internal system drive
To remove the system drive
Hold in the Power button for at least 4 seconds to force the server to shutdown.
Open the door on the front of the server.
Figure : Opening the door
Using a coin, turn the security knob clockwise to unlock the drive.
Figure : Unlocking the system drive
On the bottom drive, press down the lever to unlock the handle.
Figure : Releasing the handle
Lift the handle all the way up.
Figure : Lifting the handle
Gently pull the hard-drive tray from the hard drive bay.
Figure : Removing the hard-drive tray
Flex the back of the right side-rail, and then withdraw the back pin from the hard drive by gently pulling the side-rail down and away.
Figure : Removing the right side-rail
Flex the front of the right side-rail and withdraw the front pin from the hard drive by gently pulling the side-rail down and away.
Remove the drive from the hard-drive tray.
Figure : Removing the drive