hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Alert
    Need help after upgrading to Windows 10?

    Here are solutions to common problems seen after upgrading.

    View article

hp-concentra-wrapper-portlet

Actions
Loading...

HP Pavilion md5020n, md5820n, md5880n, and md6580n High-Definition Microdisplay TV - Using the TV Remote Control With a DVD Player

Introduction
You can use the TV remote control to program and control a DVD player.
Program a DVD player using the TV remote control
Use the following instructions to program a DVD player using the TV remote control.
 note:
In the tables below, find the listing and code for your device. If several codes are listed, try them one at a time in the order listed.
  1. On the remote control, hold down the Options and Back buttons until the device indicator blinks three times, and then release the buttons.
  2. On the remote control, hold down the Options and Back buttons until the device indicator blinks three times, and then release the buttons.
  3. On the remote control number pad, type the three-digit code for the device, and then press Enter.
    • If the code is valid, the device indicator stays on for three seconds.
    • If the code is invalid, the device indicator blinks rapidly for three seconds. Repeat step 1 and hold down the Options and Back buttons.
  4. Aim the remote control at the device and press the Power button on the remote control.
    • If the device turns on or off, the programming is successful.
    • If the device does not respond, try these steps again; or, if several device codes are listed for this device, repeat the steps using the next device code.
 note:
You must program each piece of equipment using the correct device indicator listed in the tables below. If you have two devices that use the same indicator, you can program the second device as AUX.
You can delete a programmed device from the remote control. Program the device using device code 0000. This is useful for deleting an audio device so the volume and mute buttons control the TV speakers instead of controlling the audio system.
Control panel buttons
Remote control
Item number
Description
1
STB DVD TV AUDIO DVR AUX
2
Power button
3
Options button
4
Red/CC button
5
Green/PIP button
6
Source button
7
Sound button
8
Favorites button
9
Navigation and OK buttons
10
Back button
11
Last button
12
Volume buttons
13
Player buttons
14
Number and Enter buttons
15
Settings button
16
Device button
17
Blue/Sleep button
18
Yellow/SAP button
19
Picture button
20
Guide button
21
Aspect button
22
Info button
23
Ch+ and Ch- buttons
24
Mute button
DVD Players
Includes DVD/VCRs
Indicator = DVD (or AUX)
Manufacturer
Code
Manufacturer
Code
Manufacturer
Code
Aiwa
045
Harmon Kardon
070
Philips
007, 012, 013
Apex
000, 001, 002, 018, 019, 020
Hitachi
041, 042
Pioneer
017, 069
Audiovox
046
Irradio
061
Proscan
003, 066
Blaupunkt
050
JVC
005, 008
Qwestar
034
Bose
038
Kenwood
065
RCA
003, 014
Cherry
015
Koss
062
Sampo
035
Claricon
026
Magnavox
011
Samsung (not DVD/VCR)
004, 022
Classic
027
Marantz
056
Sanyo
036, 039
Daewoo
051
Memorex
058
Sharp
021
Denon
047, 064
Mintek
031
Sherwood
037
Emerson
028, 029
Mitsubishi
059, 060
Sony
009, 010, 023, 025
Fisher
048
NAD
028, 052
Sylvania
029, 049
Funai
029, 040
Nakamichi
032
Techwood
054
GE
003, 068
Norcent
033
Toshiba
016
Go Video
043
Onkyo (including home theater)
053, 057
Yamaha
055
GPX
030
Oritron
034
Zenith
044, 063
Great Wall
067
Panasonic
006, 024
After you program the remote control for another device, you can control that device using these basic functions. Some devices may not support all functions.
  1. Press Device to select the indicator for the device you want to operate. You cannot select an indicator that is not programmed.
  2. Press buttons on the remote control to operate the device as follows:
  • To control the DVD player, press Select one or more times.
  • To turn the DVD player on and off, press the power button.
  • To change the DVD player settings (using the device menu), press Settings, use the , , , and navigation buttons, and then press OK.
  • To display information, press Info.
  • To play the DVD player, press the player button (while DVD or TV is selected).
  • To pause the DVD player, press the player button (while DVD or TV is selected).
  • To stop the DVD player, press the player button (while DVD or TV is selected).
  • To jump to the next scene (chapter), press the player button (while DVD or TV is selected).
  • To jump to the previous scene (chapter), press the player button (while DVD or TV is selected).
  • To fast forward, press the player button (while DVD or TV is selected).
  • To fast backward, press the player button (while DVD or TV is selected).
  • To select from the DVD menu, press the button, the , , , and arrow player buttons, and then OK (while DVD or TV is selected).

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
United States

hp-detect-load-my-device-portlet

Actions
Loading...