hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...
  • Alert
    Need help after upgrading to Windows 10?

    Here are solutions to common problems seen after upgrading.

    View article

hp-concentra-wrapper-portlet

Actions
Loading...

HP and Compaq Desktop PCs - Motherboard Specifications, P4GV-LA (Guppy)

Motherboard specifications table
Part / Feature
Specification / Support
Motherboard description
  • Motherboard manufacturer's name: ASUS P4GV-LA
  • HP/Compaq name: Guppy-GL6E
CPU/Processor
  • Socket: 478
  • Supports the following processors:
    • Intel Pentium 4
    • Intel Celeron with Northwood core and Prescott core
Front-side bus (FSB)
  • 533/400 MHz
Chipset
  • Northbridge: Intel 845GV Graphics and Memory Controller Hub (GMCH)
  • Southbridge: Intel ICH4
BIOS features
  • 4 Mb FWH EEPROM
  • Award BIOS with enhanced ACPI, DMI, Green, and PnP Features Plus
Form factor
  • Micro-ATX form factor, 9.6 in x 8.6 in
Memory
  • 2 x 184-pin DDR DIMM sockets support unbuffered non-ECC 2 GB 333/266 MHz DDR SDRAM memory modules
Expansion slots
  • Three PCI
  • No AGP slot
Video graphics
  • Integrated
Onboard audio or audio card
Controller: AC-97
  • Realtek ALC650/658 6-channel CODEC chipset
  • Dolby 5.1 audio support
  • Location: Integrated
Onboard LAN
  • Realtek RTL8100C
  • 10/100 Mbps LAN controller
Back panel I/O
  • One PS/2 mouse port
  • One PS/2 keyboard port
  • One VGA (monitor)
  • One Parallel
  • One serial port
  • Four USB (2.0)
  • One IEEE 1394
  • One RJ45 networking port
  • Three audio connectors: line in, line out, and microphone
Internal connectors
  • One Primary IDE connector
  • One Secondary IDE connector
  • One Floppy disk drive connector
  • One 20-pin ATX power connector
  • One 4-pin ATX 12V power connector
  • One USB 2.0 connector supports two additional USB 2.0 ports
  • IEEE 1394a connector
  • One CPU fan connector
  • One Chassis fan connector
  • One CD in connector
  • One AUX connector
  • Front panel audio connector
  • System panel connector
 note:
Motherboard specifications are subject to change without notice.
Motherboard layout and photos
  1. PS/2 mouse port
  2. Parallel port
  3. IEEE 1394 port
  4. LAN RJ-45 port
  5. Line In port
  6. Line Out port
  7. Microphone port
  8. USB 2.0 ports 3 and 4
  9. USB 2.0 ports 1 and 2
  10. Video Graphics Adapter port
  11. Serial port
  12. PS/2 keyboard port
Clearing the CMOS settings
 caution:
Do not change any jumper setting while the computer is on. Damage to the motherboard can result.
Clear RTC RAM (3-pin J1)
Jumper J2 allows you to clear the CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information.
  1. Turn off the PC and unplug the power cord.
  2. Move the jumper J2 from pins 1-2 (Normal) to pins 2-3 (Clear CMOS). Keep the cap on pins 2-3 for about 5 to 10 seconds, then move the cap back to pins 1-2.
  3. Plug the power cord and turn on the PC.
  4. Hold down the Del key during startup to enter BIOS setup and re-enter data.
 caution:
Except when clearing the RTC RAM, never remove the cap from the default position. Removing the cap causes system boot failure!
  1. Normal
  2. Clear CMOS

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
United States

hp-detect-load-my-device-portlet

Actions
Loading...