This document gives basic instructions for installing or uninstalling (removing) the Targus Stowaway Portable Keyboard software (driver) for an HP Jornada 520, 540, or 560 series PDA.
HP Jornada 500 Series PDAs - Installing and Uninstalling the Targus Stowaway Portable Keyboard Software
The software CD that came with the Targus Stowaway Portable Keyboard contains the latest driver version. If the CD has been lost or damaged, download the driver from the Targus Support Web site.
Before installing the software
To use the Targus Stowaway Portable Keyboard, the HP Jornada must have at least 27K of memory. To check the amount of memory on the HP Jornada, follow these steps:
Tap the Start bar on the top of the display.
Tap the System tab, then tap Memory.
Installing the software
When updating or reinstalling the keyboard software, remove the current keyboard driver on the HP Jornada before installing the new one. Refer to the “Uninstalling the software” section below for the steps.
If the HP Jornada is synchronizing files, wait until the synchronization has completed before beginning the Targus Stowaway Keyboard setup.
HP Jornada 520 and 560 Series
The Stowaway Portable Keyboard driver (PA820) is pre-installed on the Jornada 520 and 560 Series. Follow these steps to activate it:
On the HP Jornada, open the Programs page.
Tap the Stowaway icon.
Close the window that explains the Keyboard is an option.
Enable the Stowaway Keyboard.
The Stowaway Keyboard is now ready to use.
note:If the drivers are not pre-installed, or have been deleted, download the driver from the Targus Support Web site.
HP Jornada 540 Series
Follow these steps to install the software:
Attach the HP Jornada to the desktop computer, and synchronize to back up your files.
Insert the Targus Stowaway Keyboard software CD into the CD-ROM drive.
Open Windows Explorer on the desktop PC and double-click the CD-ROM icon to open the drive.
Double-click the setup.exe file. (A dialog box opens and says, "This application will install the Stowaway keyboard driver on your Pocket PC.")
Click OK to install the driver.
note:If reinstalling or upgrading, click Yes to proceed with the reinstall/upgrade.
Choose to install the Targus Stowaway Keyboard in the default directory, then click Yes.
A dialog box will open and say to check if there are any additional steps to complete the installation. Tap OK. (The files will be copied to the HP Jornada.)
note:If the Targus Stowaway Keyboard was previously installed on the HP Jornada, tap OK when prompted to reinstall.
The Targus Stowaway keyboard driver is now installed.
After the setup has completed and the HP Jornada has synchronized, run the Targus Stowaway Keyboard Software on the HP Jornada to activate it:
On the HP Jornada, tap Start.
Select Stowaway Keyboard.
Uninstalling the software
To remove the Stowaway Keyboard software, follow these steps:
On the HP Jornada tap Start, and then select Settings.
Tap the System tab, then select Remove Programs.
The Targus Stowaway Keyboard will be listed in the Programs in the Storage Memory list.
Tap Stowaway Keyboard, then tap Remove.
This removes the Targus Stowaway Keyboard software from your Jornada.
note:To use the keyboard again, you will need to reinstall the software for the Targus Stowaway Portable Keyboard.
Ask the community!
Country: United States