This document contains instructions on how to print from the HP Jornada 500 Series Pocket PC to a printer with an infrared port using Jetsend software.
HP Jornada 500 Series Pocket PC - Printing With Jetsend
To print from the HP Jornada 500 Series Pocket PC to a printer with an infrared port, follow the steps listed below:
note:Jetsend must be installed on the HP Jornada 500 Series Pocket PC.
The document must be saved as a BMP, JPG, TXT, JSF or GIF file. Jetsend will not recognize any other file format.
Tap on Start, Programs, Jetsend, and Jetsend Exchanger in the Jetsend folder.
Select the document that you want to print.
Point the infrared port on the HP Jornada toward the infrared port on the printer.
Tap on File, Jetsend, and To Infrared.
The infrared light on the printer will be on solid during the data transfer process. When finished printing the light will turn off. If the infrared beam is broken by being moved out of range or by an obstruction, the light will go off and the printing will stop.
note:Position the infrared ports so they line up and are less than 3 feet (1 meter) but more than 2 inches (5 centimeters) apart.
Important Jetsend availability information
Visit HP's Jetsend support and information page for details about Jetsend availability.
Other printing options
Visit Chris DeHerrera's Windows CE Web site for more details about printing in Windows CE.
Visit Field Software Products for information about Print Pocket Ce.
note:One or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside of the HP Web site.
Ask the community!
Country: United States