HP Designjet 700 Series Printers - How to Perform a Pen Alignment
How to perform a pen alignment.
To perform a pen alignment, see the following.
Make sure, that a sheet or roll of Heavy coated or coated media is loaded into the printer.
note:Do not use High Gloss media when running a pen alignment, use only Heavy coated or coated media.
Press the Access Cartridges button. The printer will move the carriage towards the right-hand side.
Open the window, remove the cartridges from the carriage, and then place them back into the appropriate slots in the carriage.
The printer will automatically perform a pen alignment after the window is closed.
Ask the community!