hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Photosmart C4100 Series All-in-One - Installing Print Cartridges

Introduction
This document contains information about installing the print cartridges.
 note:
The HP All-in-One must be powered on before you can insert the print cartridge.
  1. Place the unit flat on a level surface.
  2. Open the print cartridge door by lowering it until it stops. The print carriage moves to the far right side of the HP All-in-One.
    Figure : Print cartridge door and print carriage
  3. Pull the pink tab to remove the tape from the print cartridge.
    Figure : Removing the pink tab
     caution:
    Do not touch or remove the ink nozzles or copper-colored contacts, or re-tape the cartridges.
    Figure : Do not touch ink nozzles or copper-colored contacts
  4. Insert each print cartridge as follows:
     note:
    • Insert the tri-color print cartridge in the slot on the left side, marked with a green label.
    • Insert the black (or photo) print cartridge in the slot on the right side, marked with a black and orange label.
    1. Hold the print cartridge with the HP label facing up.
    2. Push the print cartridge firmly into the corresponding slot until it snaps into place.
      Figure : Inserting the print cartridge
      Figure : Print cartridges properly installed
  5. Close the access door.
    Figure : Access door being closed

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
New Zealand

hp-detect-load-my-device-portlet

Actions
Loading...