hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet 700 Series Printers - How to View to Plot Counter

Issue:
How to tell the number of plots that have been plotted on the HP DesignJet printers.
Solution
Print the SERVICE CONFIG plot. To get to this option from the printers front panel, do the following:
 note:
The printers display should read, "Status Ready" before beginning the following procedure.
 note:
It is helpful to set the printer to a page size that is small so that it does not take so long to print the service configuration plot. ANSI B is a good size that is readable but is not a huge plot.
  1. Press ENTER on the front control panel.
  2. Use the down arrow to scroll to ‘Utilities’ menu.
  3. Press ENTER.
  4. Use the down arrow button to scroll to ‘Service Config.'
  5. Press ENTER.
The printer should say "Receiving" at this point and, in time, will print the service configuration plot. The plot counter information is toward the bottom of the plot below the Modular Input/Output (MIO) configuration section.
 note:
The printer counts the page from the start of the page to the end of the page. It does not matter what size the page is, it is only one page. Roll or Cut Sheet feed.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag Malaysia

hp-detect-load-my-device-portlet

Actions
Loading...