hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet 450c Printers - Product Specifications

Model numbers
Description
Model number
HP Designjet 450c printer (D/A1 size)
C4715A
HP Designjet 450c printer (E/A0 size)
C4716A
Serial number location
When looking at the back of the printer, the serial number is located on the right side of the rear panel, directly above the power cord.
Printer description
The HP Designjet 450c printer is a color large format Inkjet printer that provides ease of use through features like improved media handling and a new front panel. It offers a new monochrome draft print mode to increase speed.
Printer features
The HP Designjet 450c supports HP-GL, HP-GL/2, HP-RTL, PJL and includes AutoCAD drivers. Additional features include:
  • HP ZoomSmart scaling technology
  • Tabletop design with optional legs
  • Optional roll feed with integrated automatic cutter
  • Near photo-quality images
  • Excellent line quality
I/O interface
RS-232 and bidirectional with ECP mode (IEEE-1284) built in; I/O switching
Media specifications
The HP Designjet 450c printer supports the following media:
HP Designjet 450c Papers and Films
610 mm (24 inches)
914 mm (36 inches)
HP Bright White Inkjet Paper
C1860A
C1861A
HP Translucent Bond
C3860C
C3859A
HP Vellum
C3862A
C3861A
HP Natural Tracing Paper
C3869A
C3868A
HP Clear Film
C3876A
C3875A
HP Matte Film
51642A
51642B
HP Coated Paper
C6019B
C6020B
HP Heavyweight Coated Paper
C3880A
C3879A
HP Heavyweight Coated Paper
C6021B
C6022B
HP High-Gloss Photo Paper
C3882A
C3881A
HP High-Gloss White Film
C3886A
C3885A
 note:
For image printing purposes, some HP translucent bond, HP vellum, and HP natural tracing paper are not recommended.
Roll media should have an inner core diameter of 2 inches and an outer core diameter of 2.125 inches. The maximum diameter of the rolls is 3.8 inches. Roll widths can be 24 or 36 inches.
Operating Systems
  • Windows Vista
  • Windows XP
To see if your operating system is supported, check the Get drivers, manuals, parts & solutions page.
Media handling
Supported media/sizes
Minimum
Maximum
Width (carriage axis)
8.3 inches (210 mm)
E size printer: 36.1 inches (917 mm)
D size printer: 24.6 inches (625 mm)
Length (carriage axis)
8.3 inches (210 mm)
Sheet: 64 inches (1.625 m)
Maximum length of long-axis print on roll media: 50 feet (15.2 m)
Margins
Leading Edge
.67 inch (17 mm)
Trailing Edge
.67 inch (17 mm)
Sides
.2 inch (5 mm)
 note:
All measurements are +/- 0.08 inch (2 mm).
Ink
Ink Cartridge
Part Number
Black
51640A
Cyan
51644C
Magenta
51644M
Yellow
51644Y
  • The combination of these ink cartridges and HP papers and films provides superior print quality, short drying times, and vibrant color quality. Other ink systems and printheads do not work in this printer.
  • Expect to print approximately 20 A0/E-sized prints when printing on coated paper.
  • Maximum ink in each cartridge is about 42 ml.
  • HP cannot guarantee optimum print quality after the date printed on the print cartridge.
  • HP does not recommend using refilled print cartridges in HP Inkjet printers.
Memory
Standard
4 MB
Maximum
36 MB
The memory capacity of the HP Designjet 400 series printer is 36 MB. Four (4) MB of memory are built-in RAM on the main board. The remainder is available through one SIMM (single inline memory module) slot that can take either a 4 MB, 8 MB, 16 MB, or 32 MB SIMM card. The second SIMM socket is intended for code upgrades.
The HP Designjet 400 series printer is shipped with 4 MB of RAM on the main board as standard. Available memory is reduced by approximately 2 MB of "overhead" requirements; for example, stack space, the I/O buffer, and variable storage. A rough estimate of the ratio of user-to-DJ400 file storage is 0.8/1. File expansion in the HP Designjet 400 series printer buffer depends largely on file content. Labels, polygons, line widths greater than 1 mm, and raster data are examples of memory-eaters.
When receiving a print, the HP Designjet 400 series printer stores all the vector data and raster data in the memory buffer. If the buffer is full, remaining vector data is read in and discarded. If sending all raster data, the buffer is filled, then printed; plotting continues in this way until the print is complete.
 note:
The 4 MB and 8 MB memory SIMM's are no longer available for the 450C printer. Available memory SIMM's for the 450C printer are listed below.
16MB, 70nS, 36-bit SIMM memory module - (D2297A)
32MB, 70nS, 36-bit parity SIMM memory module - (D3578A)
Click here to purchase parts and accessories from the HP Parts store at http://www.hp.com/buy/parts.
 note:
Part numbers are subject to change. If searching for a specific part is unsuccessful, try searching for the printer or printer model (i.e Designjet 450c, C4715A). Doing so will generally provide navigation to all available parts for that product.
Performance
A1/D-size, Mono CAD drawing, HP Opaque Bond
Print Quality
Time
Fast
1:36
Normal
3:46
Best
5:02
A1/D-size, Color CAD drawing, HP Opaque Bond
Print Quality
Time
Fast
3:27
Normal
3:54
Best
7:13
A1/D-size, Color images, Photo Paper
Print Quality
Time
Fast
12:03
Normal
12:35
Best
18:44
Reliability
Recommended maximum number of prints per day
20*
*medium density E/A0-size CAD print
Physical specifications
HP Designjet 400 Series Printers
Without Roll-Feed and Legs
With Roll-Feed
With Legs
Height E/A0-size D/A1-size
13.1 inches (332 mm)
13.1 inches (332 mm)
16.4 inches (415 mm)
16.4 inches (415 mm)
46.0 inches (1165 mm)
46.0 inches (1165 mm)
Depth
E/A0-size
D/A1-size
9.1 inches (231 mm)
9.1 inches (231 mm)
14.0 inches (355 mm)
14.0 inches (355 mm)
9.1 inches (231 mm)
9.1 inches (231 mm)
Length
E/A0-size
D/A1-size
52.4 inches (1329 mm)
40.6 inches (1031 mm)
52.4 inches (1329 mm)
40.6 inches (1031 mm)
52.4 inches (1329 mm)
40.6 inches (1031 mm)
Weight
E/A0-size
D/A1-size
68.2 lbs. (31 kg)
57.2 lbs. (26 kg)
Contact HP
Contact HP
Electrical specifications
Category
Specification
Input Voltage*
100 to 240 Volts alternating current (VAC) +/- 10%
Frequency
47 to 63 Hertz (Hz)
Power Consumption
70 watts maximum (2.0 Amperes maximum)
Environmental specifications
Category
Specification
Operating Temperature
59 to 95 degrees Fahrenheit (F)
15 to 35 degrees Celsius (C)
Non-Operating Temperature (storage)
-40 to 158 degrees F without cartridges
-40 to 70 degrees C without cartridges
Acoustics
Plotting: 45 deciBels
Idle: <20 deciBels
Relative Humidity
5 to 95 percent at 104 degrees F, non-condensing
General warranty statement
One year onsite warranty
Safety certifications
Category
Specification
Safety Certifications
IEC 950, EN60950, CSA C22.2 No.950, UL 1950, NOM-019-SCFI-1993
EMC Certifications
CISPR22: Class B, EN 50082-1, IEC 801-2, IEC 801-3, IEC 801-4, FCC Part 15
- Class B/DOC-B/VCCI-2/RRL-A

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag Latvia

hp-detect-load-my-device-portlet

Actions
Loading...