hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet 330 and 350c Printers - Front Panel System Error Lights

Front panel system error lights/LEDs.
LEDs on Steady
Explanation
Action
Plain+ Load Media+ Error
Servo error in the x axis (media axis)
Clear media binding
Plain+ Error+ Ready
RS232 data overflow
Check baud rate, parity, cable, Cycle power, resend plot
Load Media+ Error+ Film
Servo error in the y axis (carriage axis)
Cycle power. With power off manually move carriage
Plain+ Load Media+Error+film
Problems with the free movement
With power off manually move of the carriage
Plain+ Error+ Film+Normal
Electrical error
Reseat all cartridges, Clean contacts
Plain+ Error+ Normal+ Roll
Firmware failure
Cycle power, reseat all cartridges, clean contacts
Plain+ Error+ Film+Fast+Roll
Cartridge alignment firmware error
Cycle power, reseat all cartridges
Error+ Film
DRAM or SIMM DRAM failure. Or One or more of the cartridges is missing, making bad contact, or is the wrong type.
Cycle power, service. Insure all cartridges are seated and working properly.
Error+ Fast
Swath RAM test failure
Cycle power, service
Error+ Normal
Not enough memory to allocate internal data structures
Cycle power, service
Error + Coated
The printer detects that there is a short circuit in one of the addresses that send signals to the cartridges. Or One or more of the cartridges is missing, making bad contact, or is the wrong type.
Insure all cartridges are seated and working properly.
Error+ Film + Ready
Failure of RS232 loopback test.
Cycle power, service
Error+ Ready+ Roll
Special firmware error
Cycle power, service
Plain+ Error+ Fast
Error detected in EEROM
Cycle power, service
Plain+ Error+ Roll
Processor fault
Cycle power, service
Plain+Load Media+Error+Fast
Error in media axis servo feedback loop
Cycle power, service
Plain+Error+ Film+Fast
Not enough memory for the sensor data structure
Cycle power, service
Plain+ Error+ Film+ Ready
Failure of Centronics READ
Cycle power, service.
Plain+ Error+ Fast+ Roll
Communication broken between the 2 processors on the main PCA
Cycle power, service
Plain+Load Media+Error+Film+Fast
Error in bail lift mechanism (It is the carriage that tests to see whether the bail is in the correct position)
Cycle power, service
Load Media+ Error+ Normal
Error in x axis calibration
Cycle power, service
Load Media+Error+Film+Fast
Error in y axis encoder
Cycle power, service

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag India

hp-detect-load-my-device-portlet

Actions
Loading...