HP Designjet 700 Series Printers - How to View to Plot Counter
How to tell the number of plots that have been plotted on the HP DesignJet printers.
Print the SERVICE CONFIG plot. To get to this option from the printers front panel, do the following:
note:The printers display should read, "Status Ready" before beginning the following procedure.
note:It is helpful to set the printer to a page size that is small so that it does not take so long to print the service configuration plot. ANSI B is a good size that is readable but is not a huge plot.
Press ENTER on the front control panel.
Use the down arrow to scroll to ‘Utilities’ menu.
Use the down arrow button to scroll to ‘Service Config.'
The printer should say "Receiving" at this point and, in time, will print the service configuration plot. The plot counter information is toward the bottom of the plot below the Modular Input/Output (MIO) configuration section.
note:The printer counts the page from the start of the page to the end of the page. It does not matter what size the page is, it is only one page. Roll or Cut Sheet feed.
Ask the community!