hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP 7550 Series Plotters - Paper is Ejected When Loading

Issue:
Why the paper ejects out the back when attempting to load it.
Solution
There are two possible reasons:
  1. The paper is not a standard size (A=8.5 x 11, B=11 x 17 inches, A4=210 x 297, A3=297 x 420). The paper will be ejected if it does not conform to these measurements. (The typical problem is that the paper is too short.)
  2. The media sensor is out of calibration or broken. Try calibrating the media sensor by the doing the following:
    1. Load paper manually.
    2. Power the plotter on while holding down the ENTER and two (2) buttons simultaneously.
    3. This will recalibrate the media sensor.
    4. If the symptoms persist, the plotter needs to be serviced.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag India

hp-detect-load-my-device-portlet

Actions
Loading...