HP ColorPro Plotter - Position of P1 and P2
Positioning P1 and P2 on the HP ColorPro plotter.
When the plotter is turned on, pressing P1 will move Pen 1 to its default position. Press P2 to move Pen 2 to its default position. To reposition P1 or P2:
Use the CURSOR CONTROL buttons to move the pen to the desired P1 point.
Hold down the ENTER button and press the P1 button to enter the new position.
Perform steps 1 and 2 for the P2 position.
ISSUE: Positioning P1 and P2 from the software.
Change the HP-GL default positions by using the Scale (SC) command.
Ask the community!