Apple AirPrint is a built-in print driver that allows you to print from an iPhone, iPad, or iPod touch to most HP printers.
To access additional printer features such as scanning and printer management tools, install the HP Smart app. For more information, go to HP printer setup (HP Smart app).
Make sure the printer and your Apple device are connected to the same wireless network.
On your Apple device, make sure Wi-Fi is turned on and there is a check mark next to the name of your local Wi-Fi network. If you are connected to a different network, tap the name of your network to join it.
Restart the printer, and then check the printer network connection status.
Printers with a touchscreen control panel: Touch the Wireless icon or open the Network Settings or Setup menu to view the network connection status.
Printers without a touchscreen control panel: Make sure the light next to the wireless icon or button is on and not blinking.
If the printer is not connected, continue to the next step.
Place the printer within range of the Wi-Fi router signal, and then connect it to the network.
Printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password.
Printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer wireless light stops flashing when the connection completes.
HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button and the Power button on the back of the printer for five seconds until the blue bar flashes. Within two minutes, press and hold the WPS button on the router until the connection process begins. The blue bar stops flashing when the connection completes.
Make sure the printer and your Apple device are connected to the same wireless network.
On your Apple device, make sure Wi-Fi is turned on and there is a check mark next to the name of your local Wi-Fi network. If you are connected to a different network, tap the name of your network to join it.
Restart the printer, and then check the printer network connection status.
Printers with a touchscreen control panel: Touch the Wireless icon or open the Network Settings or Setup menu to view the network connection status.
Printers without a touchscreen control panel: Make sure the light next to the wireless icon or button is on and not blinking.
If the printer is not connected, continue to the next step.
Place the printer within range of the Wi-Fi router signal, and then connect it to the network.
Printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password.
Printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer wireless light stops flashing when the connection completes.
HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button and the Power button on the back of the printer for five seconds until the blue bar flashes. Within two minutes, press and hold the WPS button on the router until the connection process begins. The blue bar stops flashing when the connection completes.
Still have a question? Find additional answers and help.
Make sure the printer and your Apple device are connected to the same wireless network.
On your Apple device, make sure Wi-Fi is turned on and there is a check mark next to the name of your local Wi-Fi network. If you are connected to a different network, tap the name of your network to join it.
Restart the printer, and then check the printer network connection status.
Printers with a touchscreen control panel: Touch the Wireless icon or open the Network Settings or Setup menu to view the network connection status.
Printers without a touchscreen control panel: Make sure the light next to the wireless icon or button is on and not blinking.
If the printer is not connected, continue to the next step.
Place the printer within range of the Wi-Fi router signal, and then connect it to the network.
Printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password.
Printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer wireless light stops flashing when the connection completes.
HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button and the Power button on the back of the printer for five seconds until the blue bar flashes. Within two minutes, press and hold the WPS button on the router until the connection process begins. The blue bar stops flashing when the connection completes.
Make sure the printer and your Apple device are connected to the same wireless network.
On your Apple device, make sure Wi-Fi is turned on and there is a check mark next to the name of your local Wi-Fi network. If you are connected to a different network, tap the name of your network to join it.
Restart the printer, and then check the printer network connection status.
Printers with a touchscreen control panel: Touch the Wireless icon or open the Network Settings or Setup menu to view the network connection status.
Printers without a touchscreen control panel: Make sure the light next to the wireless icon or button is on and not blinking.
If the printer is not connected, continue to the next step.
Place the printer within range of the Wi-Fi router signal, and then connect it to the network.
Printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password.
Printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer wireless light stops flashing when the connection completes.
HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button and the Power button on the back of the printer for five seconds until the blue bar flashes. Within two minutes, press and hold the WPS button on the router until the connection process begins. The blue bar stops flashing when the connection completes.
Make sure the printer and your Apple device are connected to the same wireless network.
On your Apple device, make sure Wi-Fi is turned on and there is a check mark next to the name of your local Wi-Fi network. If you are connected to a different network, tap the name of your network to join it.
Restart the printer, and then check the printer network connection status.
Printers with a touchscreen control panel: Touch the Wireless icon or open the Network Settings or Setup menu to view the network connection status.
Printers without a touchscreen control panel: Make sure the light next to the wireless icon or button is on and not blinking.
If the printer is not connected, continue to the next step.
Place the printer within range of the Wi-Fi router signal, and then connect it to the network.
Printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password.
Printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer wireless light stops flashing when the connection completes.
HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Press and hold the Wi-Fi button and the Power button on the back of the printer for five seconds until the blue bar flashes. Within two minutes, press and hold the WPS button on the router until the connection process begins. The blue bar stops flashing when the connection completes.
Cancel print jobs from the printer control panel or with the Print Center on your Apple device.
From the printer control panel: Press the Cancel button .
From your Apple device: While the print job is in progress, open the Apps Switcher. For devices with a Home button:, press the Home button twice. For iPhone X and iPad or later, swipe up from the bottom to the middle of the screen and hold until the apps display. Select Print Center, and then tap Cancel Printing.