hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

Setting Up the Printer Hardware for the HP Photosmart 5520 e-All-in-One and HP Deskjet Ink Advantage 5520 e-All-in-One Printer Series

This document is for the HP Photosmart 5520 e-All-in-One and HP Deskjet Ink Advantage 5520 e-All-in-One printers
This document explains how to set up the physical parts of the printer. Complete these steps before you install the printer software on your computer.
The following video demonstrates how to set up the All-in-One.
If you have trouble viewing the video or to view the video in a different size, click here to play the video on YouTube.
The contents might vary by country/region. See the packaging for a list of items shipped in the box.
Step two: Unpack the All-in-One
  1. Remove all tape and packing material from the outside of the printer.
    Figure : Remove all packing material from the outside of the printer
    Image: Remove all packing material from the outside of the printer.
  2. Open the cartridge access door, and then remove the tape from inside the printer.
    Figure : Open the cartridge access door, and then remove the tape from inside the printer
    Image: Open the cartridge access door, and then remove the tape from inside the printer
  3. Close the cartridge access door.
    Figure : Close the cartridge access door
    Image: Close the cartridge access door
  4. Pull out the paper tray, and then remove the tape from the tray.
    Figure : Remove tape from the paper tray
    Image: Remove tape from the paper tray
  5. Push the paper tray back into the printer until it clicks into place.
Step three: Connect the power cord and turn on the All-in-One
  1. Connect the power cord to the rear of the printer, and then plug it into an electrical outlet.
    Figure : Connect the power cord
    Image: Connect the power cord
  2. Press the Power button () to turn on the printer.
Step four: Select your language and country/region
When you first turn on the printer, it prompts you to select your language and region. Follow these steps to set the default language and country/region for your printer.
  1. Touch your desired language, and then touch Yes to confirm the language choice. The Set Region menu displays.
    Figure : Select your language
    Image: Select your language.
  2. Touch your desired region, and then touch Yes to confirm the country/region choice.
  1. Open the paper tray door, and then pull out the paper tray.
  2. Slide the paper width guides to their outermost positions.
    Figure : Slide the paper width guides to their outermost positions
    Image: Slide the paper width guides to their outermost positions
  3. Load a stack of plain paper into the tray with the short edge facing toward the product and the print side down. Push the stack into the tray until it stops.
    Figure : Load the paper into the tray
    Image: Load the paper into the tray
  4. Slide the paper width guides in until they rest against the edges of the paper, and then slide the tray back in until it stops.
    Figure : Slide the paper width guides against the edges of the paper, and then slide the tray in
    Image: Slide the paper width guides against the edges of the paper, and then slide the tray in
  5. Pull open and lift the paper tray extender.
    Figure : Pull open and lift the paper tray extender
    Image: Pull open and lift the paper tray extender
Step six: Install the cartridges
 caution:
When you first setup the printer you must install the cartridges that shipped in the box. These cartridges are labeled SETUP, and they calibrate your printer before the first print job. Failure to install the SETUP cartridges during the initial printer setup causes an error.
  1. If the printer is off, press the Power button () to turn on the printer. Wait until the printer is idle and silent before continuing.
  2. Open the cartridge access door. The carriage moves to the access area.
    Figure : Open the cartridge access door
    Image: Open the cartridge access door
  3. Remove the plastic wrap from a new cartridge by pulling the orange tab.
    Figure : Remove the plastic wrap from a new cartridge
    Image: Remove the plastic wrap from a new cartridge
  4. Remove the orange cap from the cartridge. Twist the cap counter-clockwise until it snaps off.
    Figure : Remove the orange cap from the cartridge
    Image: Remove the orange cap from the cartridge
  5. With the nozzle and the contacts facing down, push the cartridge into its slot. Press down on the cartridge until it clicks into place. Make sure that the color icon on the cartridge label matches the color icon on the slot.
    Figure : Insert the cartridge
    Image: Insert the cartridge
  6. Repeat these steps to insert the other cartridges.
  7. Close the cartridge access door.
    Figure : Close the cartridge access door
    Image: Close the cartridge access door
Step seven: Align the All-in-One
Use one of the following methods to align the printer.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
United Kingdom

hp-detect-load-my-device-portlet

Actions
Loading...