This document is for HP printers that use tabbed SETUP cartridges.
The message 'Use SETUP Cartridges' displays on the printer control panel, and the printer does not print.
note:The graphics in this document are examples. Your cartridges might not look exactly like the graphics shown. This document shows a carriage that uses four cartridges, but the procedures are the same for printers with five cartridges.
caution:Be careful not to bend the tab out more than 1.27 cm (0.5 in). Moving the tab too far might damage the cartridge or cause the tab to break off.
note:The product might go through a warm-up period which can last up to one minute. Wait until the product is idle and silent before continuing.
caution:Clean the cartridges one at a time. Do not leave a cartridge outside the printer for more than 30 minutes.
caution:Be careful to wipe only the contacts. Do not smear any ink or debris elsewhere on the cartridge.
warning:Disconnect the power cord before you reach inside the printer to avoid risk of injuries or electric shock.