hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Digital Home Networking - Connecting to MSN DSL Service

Introduction
Follow the steps in this document to enable the gateway to connect to MSN DSL service.
Instructions
  1. Make sure that the computer is configured to obtain an IP address automatically.
  2. Do a hard reset on the hn200 product to make sure it has the factory default settings.
  3. Open a browser window. In the address bar, type 192.168.1.1 and then press Enter.
  4. When prompted, Type admin for the username and password, then click OK.
  5. Change the LAN IP address to 192.192.192.1. Click Apply.
  6. Turn off the computer.
  7. Unplug the hn200 product from the power outlet.
  8. Plug the hn200 product to the power outlet.
  9. Turn on the PC.
  10. The computer should now be able to use the MSN DSL connection to the Internet.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag Bulgaria

hp-detect-load-my-device-portlet

Actions
Loading...