hp-support-head-portlet

Actions
Loading...

HP Customer Support

hp-contact-secondary-navigation-portlet

Actions
Loading...

hp-share-print-widget-portlet

Actions
Loading...

hp-concentra-wrapper-portlet

Actions
Loading...

HP Designjet 700 Series Printers - How to Configure the Front Panel

The Front Panel
The Display Section
The display section is used primarily for setting the printer’s configuration.
Print the current configuration.
Printing the Menus Plot
You can see the complete menu structure available on the printer by printing the Front Panel Menus plot. To help you understand the menu structure and how to navigate it, print it now:
  1. Check that media is loaded.
  2. Select the Menu option from the Demo Plots menu. The Front-Panel Menus plot will be printed.
Description of the Menus Plot
The Front-Panel Menus plot shows the full menu structure.
Entering the Menu System
  1. With a Status screen displayed, for instance "Status Ready," press Enter. ATUS Ready
  2. Either the Short Menus screen or the Full Menus screen is displayed, with the Queueing & Nesting option shown.
     note:
    You may not be able to access the menu system immediately, if the current task overrides it. If this happens, wait until the task is completed and try again.
  3. Change to full menu mode, if necessary.
  4. You are now in the first level menu, shown in the first column of the Front Panel Menus plot.
Navigating the Menu System
Once in the first-level menu, you navigate the system using the display keys.
Other types of screens
Other screens, such as those displayed for selecting media type during media loading or for changing the language are further examples of selection menus that are not part of the main menu system. These behave in the same way as other menus, in that you can scroll through the options using the cursor keys and Enter to select a displayed option.
Examples
Example 1: Changing margins
  1. With the status screen displayed, press ENTER to access the menu system.
    Either the Short Menus screen or the Full Menus screen is displayed with the Queuing & Nesting option. If necessary change to full menu mode.
  2. Press up arrow once, or down arrow 6 times, to display Page Format.
  3. Press ENTER.
  4. Press up arrow twice, or down arrow twice, to display Margins.
  5. Press ENTER.
  6. Use the up and down arrows to display the available options, and when the one required is displayed, press ENTER to select it as the value for Margins.
Example 2: Changing the drying time
  1. With the status screen displayed, press ENTER to access the menu system.
    The Full Menus screen is displayed with the Queuing & Nesting option.
  2. Press up arrow 3 times, or down arrow 4 times, to display Device Setup.
  3. Press ENTER.
  4. Press up arrow twice, or down arrow twice, to display Drying Time.
  5. Press ENTER.
  6. Use the up and down arrows to display the available options, and when the one required is displayed, press ENTER to select it as the value for Drying Time.

hp-feedback-input-portlet

Actions
Loading...

hp-online-communities-portlet

Actions
Loading...

Ask the community!


Support Forum

Support Forum

Join the conversation! Find Solutions, ask questions, and share advice with other HP product owners. Visit now


hp-feedback-banner-portlet

Actions
Loading...

hp-country-locator-portlet

Actions
Loading...
Country: Flag Australia

hp-detect-load-my-device-portlet

Actions
Loading...